Skip to content
Roller Chain
Navigate
🔗 ANSI Standard Roller Chain By Size
🔗 Corrosion Resistant Roller Chain
Roller chains are widely used across various industries, serving in drives, conveyors, bucket elevators, and tension linkages. They offer several advantages compared to belt and gear drives, including the ability to bridge large gaps between shafts, diminish the load on shafts and bearings, provide simplicity in operation, cost-effectiveness, and demand reduced maintenance.
We are at your service to provide expertise and guidance, whether you are embarking on a new project and require assistance in selecting the ideal roller chain or seeking a replacement for an existing one.
Roller Chain by Type
USA Roller Chain and Sprockets is an industry-leading roller chain supplier accredited with exceptional customer service. We take roller chain seriously, combining quality products and expert service to pair our customers with the best chain for their application. With the largest online selection of roller chains anywhere we make it easy to find your chain online or via phone consultation. Roller chains have been about since the 1880s, its no wonder that they have become so common today with their simplistic yet highly effective design. We supply chains all around the world, and offer ANSI, ISO, and DIN Standard roller chains directly from stock!
Standard Roller Chains
We have a full line of standard ANSI roller chains available. Standard series roller chains include single strand, multi strand, and heavy series. We have also put together a roller chain size chart for help with identifying your existing chain or designing a new application. In addition, we also carry a full range of sprockets and attachments for standard roller chains.
Single-Strand Roller Chains are also categorized as simplex or are designated with a (-1) after the specific chain size. The "standard" lineup of chains consists of the most commonly used roller chains in the world today. These sizes include # 25 (1/4" pitch) up to #240 (3" pitch). Within each size, we offer different quality levels and options.
|
Chain Size
|
Pitch (P)
|
Roller Width (W)
|
Roller Diameter (D)
|
Overall Width (A)
|
Plate Height (H)
|
Plate Thickness (T)
|
Pin Diameter (E)
|
Avg. Ultimate Strength
|
Weight (Per Ft)
|
|---|---|---|---|---|---|---|---|---|---|
| #25-1 | 0.250" | 0.125" | 0.130" | 0.306" | 0.228" | 0.029" | 0.091" | 930 LBS | 0.09 LBS |
| #35-1 | 0.375" | 0.188" | 0.200" | 0.456" | 0.356" | 0.050" | 0.141" | 2,320 LBS | 0.22 LBS |
| #40-1 | 0.500" | 0.312" | 0.312" | 0.642" | 0.475" | 0.058" | 0.156" | 3,970 LBS | 0.42 LBS |
| #41-1 | 0.500" | 0.250" | 0.306" | 0.522" | 0.390" | 0.050" | 0.141" | 2,760 LBS | 0.28 LBS |
| #50-1 | 0.625" | 0.375" | 0.400" | 0.794" | 0.594" | 0.079" | 0.200" | 6,620 LBS | 0.68 LBS |
| #60-1 | 0.750" | 0.500" | 0.469" | 0.994" | 0.712" | 0.093" | 0.234" | 9,270 LBS | 0.97 LBS |
| #80-1 | 1.000" | 0.625" | 0.625" | 1.290" | 0.950" | 0.125" | 0.312" | 16,540 LBS | 1.71 LBS |
| #100-1 | 1.250" | 0.750" | 0.750" | 1.578" | 1.188" | 0.157" | 0.375" | 25,360 LBS | 2.65 LBS |
| #120-1 | 1.500" | 1.000" | 0.875" | 1.966" | 1.425" | 0.189" | 0.437" | 32,640 LBS | 3.79 LBS |
| #140-1 | 1.750" | 1.000" | 1.000" | 2.132" | 1.663" | 0.219" | 0.500" | 45,210 LBS | 4.96 LBS |
| #160-1 | 2.000" | 1.250" | 1.125" | 2.564" | 1.901" | 0.255" | 0.563" | 57,780 LBS | 6.32 LBS |
| #180-1 | 2.250" | 1.406" | 1.406" | 2.808" | 2.130" | 0.283" | 0.687" | 80,480 LBS | 9.04 LBS |
| #200-1 | 2.500" | 1.500" | 1.562" | 3.160" | 2.376" | 0.312" | 0.782" | 109,150 LBS | 10.31 LBS |
| #240-1 | 3.000" | 1.875" | 1.875" | 3.772" | 2.850" | 0.375" | 0.937" | 152,140 LBS | 16.40 LBS |
Multi-strand roller chains consist of double-strand (duplex), triple strand (triplex), quad strand (quadruple), five-strand (quintuple), six-strand (sextuple), eight strand (octonary), ten strand (decuple), and twelve strand (duodenary) roller chains.
Standard Double Strand Chain Sizes:
Standard Triple Strand Chain Sizes:
Standard Quad Strand Chain Sizes:
Standard Five Strand Chain Sizes:
Standard Six Strand Chain Sizes:
Standard Eight Strand Chain Sizes:
Standard Ten Strand Chain Sizes:
Standard Twelve Strand Chain Sizes:
Standard Double Strand Chain Sizes:
|
Chain Size
|
Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Avg. Ultimate Strength | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|---|
| #25-2 | 0.250" | 0.125" | 0.130" | 0.590" | 0.230" | 0.030" | 0.091" | 1,700 LBS | 0.19 LBS |
| #35-2 | 0.375" | 0.188" | 0.200" | 0.876" | 0.356" | 0.050" | 0.141" | 4,640 LBS | 0.46 LBS |
| #40-2 | 0.500" | 0.312" | 0.312" | 1.212" | 0.475" | 0.058" | 0.156" | 7,500 LBS | 0.85 LBS |
| #50-2 | 0.625" | 0.375" | 0.400" | 1.504" | 0.594" | 0.079" | 0.200" | 13,230 LBS | 1.37 LBS |
| #60-2 | 0.750" | 0.500" | 0.469" | 1.890" | 0.712" | 0.093" | 0.234" | 18,530 LBS | 2.04 LBS |
| #80-2 | 1.000" | 0.625" | 0.625" | 2.440" | 0.950" | 0.125" | 0.312" | 33,080 LBS | 3.41 LBS |
| #100-2 | 1.250" | 0.750" | 0.750" | 2.986" | 1.188" | 0.157" | 0.375" | 50,720 LBS | 5.28 LBS |
| #120-2 | 1.500" | 1.000" | 0.875" | 3.776" | 1.425" | 0.189" | 0.437" | 65,270 LBS | 7.88 LBS |
| #140-2 | 1.750" | 1.000" | 1.000" | 4.058" | 1.663" | 0.219" | 0.500" | 90,410 LBS | 10.03 LBS |
| #160-2 | 2.000" | 1.250" | 1.125" | 4.900" | 1.901" | 0.255" | 0.563" | 115,550 LBS | 13.48 LBS |
| #180-2 | 2.250" | 1.406" | 1.406 | 5.414" | 2.130" | 0.283" | 0.687" | 160,960 LBS | 17.65 LBS |
| #200-2 | 2.500" | 1.501" | 1.562" | 5.980" | 2.376" | 0.312" | 0.782" | 218,300 LBS | 21.95 LBS |
| #240-2 | 3.000" | 1.875" | 1.875" | 7.236" | 2.850" | 0.375" | 0.937 | 304,280 LBS | 32.45 LBS |
| Chain Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Avg. Ultimate Strength | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|---|
| #25-3 | 0.250" | 0.125" | 0.091" | 0.860" | 0.230" | 0.030" | 0.091" | 2,790 LBS | 0.27 LBS |
| #35-3 | 0.375" | 0.188" | 0.200" | 1.262" | 0.356" | 0.050" | 0.141" | 6,950 LBS | 0.70 LBS |
| #40-3 | 0.500" | 0.312" | 0.312" | 1.776" | 0.475" | 0.058" | 0.156" | 11,250 LBS | 1.27 LBS |
| #50-3 | 0.625" | 0.375" | 0.400" | 2.222" | 0.594" | 0.079" | 0.200" | 19,850 LBS | 2.05 LBS |
| #60-3 | 0.750" | 0.500" | 0.469" | 2.794" | 0.712" | 0.093" | 0.234" | 27,790 LBS | 3.02 LBS |
| #80-3 | 1.000" | 0.625" | 0.625" | 3.582" | 0.950" | 0.125" | 0.312" | 49,620 LBS | 5.10 LBS |
| #100-3 | 1.250" | 0.750" | 0.750" | 4.396" | 1.188" | 0.157" | 0.375" | 76,080 LBS | 7.92 LBS |
| #120-3 | 1.500" | 1.000" | 0.875" | 5.546" | 1.425" | 0.189" | 0.437" | 97,910 LBS | 11.80 LBS |
| #140-3 | 1.750" | 1.000" | 1.000" | 6.010" | 1.663" | 0.219" | 0.500" | 135,610 LBS | 15.00 LBS |
| #160-3 | 2.000" | 1.250" | 1.125" | 7.200" | 1.901" | 0.255" | 0.563" | 173,320 LBS | 20.20 LBS |
| #200-3 | 2.500" | 1.501" | 1.562" | 8.798" | 2.376" | 0.312" | 0.782" | 327,450 LBS | 32.72 LBS |
| #240-3 | 3.000" | 1.875" | 1.875" | 10.696" | 2.850" | 0.375" | 0.937 | 456,420 LBS | 48.19 LBS |
| Chain Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Avg. Ultimate Strength | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|---|
| #25-4 | 0.250" | 0.125" | 0.130" | 1.070" | 0.232" | 0.028" | 0.091" | 3,350 LBS | 0.35 LBS |
| #35-4 | 0.375" | 0.188" | 0.200" | 1.713" | 0.354" | 0.049" | 0.141" | 10,120 LBS | 0.82 LBS |
| #40-4 | 0.500" | 0.312" | 0.312" | 2.342" | 0.475" | 0.058" | 0.156" | 15,000 LBS | 1.60 LBS |
| #50-4 | 0.625" | 0.375" | 0.400" | 2.962" | 0.594" | 0.079" | 0.200" | 26,460 LBS | 2.72 LBS |
| #60-4 | 0.750" | 0.500" | 0.469" | 3.690" | 0.712" | 0.093" | 0.234" | 37,050 LBS | 3.97 LBS |
| #80-4 | 1.000" | 0.625" | 0.625" | 4.776" | 0.950" | 0.125" | 0.312" | 66,150 LBS | 6.75 LBS |
| #100-4 | 1.250" | 0.750" | 0.750" | 5.806" | 1.188" | 0.157" | 0.375" | 101,430 LBS | 10.27 LBS |
| #120-4 | 1.500" | 1.000" | 0.875" | 7.336" | 1.425" | 0.189" | 0.437" | 130,540 LBS | 14.97 LBS |
| #140-4 | 1.750" | 1.000" | 1.000" | 7.894" | 1.650" | 0.220" | 0.500" | 193,600 LBS | 19.6 LBS |
| #160-4 | 2.000" | 1.250" | 1.125" | 9.421" | 1.882" | 0.252" | 0.563" | 242,000 LBS | 26.0 LBS |
| #200-4 | 2.500" | 1.500" | 1.562" | 11.531" | 2.362" | 0.315" | 0.781" | 422,400 LBS | 43.25 LBS |
| #240-4 |
3.000"
|
1.875" | 1.875" | 14.122" | 2.815" | 0.374" | 0.937" | 616,000 LBS | 61.22 LBS |
| Chain Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Avg. Ultimate Strength | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|---|
| #40-5 | 0.500" | 0.312" | 0.312" | 2.98" | 0.475" | 0.058" | 0.156" | 21,450 LBS | 2.11 LBS |
| #50-5 | 0.625" | 0.375" | 0.400" | 3.70" | 0.594" | 0.079" | 0.200" | 34,650 LBS | 3.37 LBS |
| #60-5 | 0.750" | 0.500" | 0.469" | 4.65" | 0.712" | 0.093" | 0.234" | 49,500 LBS | 4.97 LBS |
| #80-5 | 1.000" | 0.625" | 0.625" | 6.02" | 0.950" | 0.125" | 0.312" | 88,000 LBS | 8.60 LBS |
| #100-5 | 1.250" | 0.750" | 0.750" | 7.35" | 1.188" | 0.157" | 0.375" | 133,100 LBS | 12.9 LBS |
| #120-5 | 1.500" | 1.000" | 0.875" | 9.27" | 1.425" | 0.189" | 0.437" | 187,000 LBS | 19.2 LBS |
| #140-5 | 1.750" | 1.000" | 1.000" | 10.02" | 1.663" | 0.219" | 0.500" | 242,000 LBS | 24.4 LBS |
| #160-5 | 2.000" | 1.250" | 1.125" | 11.94" | 1.901" | 0.255" | 0.563" | 302,500 LBS | 32.5 LBS |
| #200-5 | 2.500" | 1.501" | 1.562" | 14.72" | 2.376" | 0.312" | 0.782" | 528,000 LBS |
56.4 LBS
|
| Chain Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Avg. Ultimate Strength | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|---|
| 35-6 | 0.375" | 0.188" | 0.200" | 2.50" | 0.354" | 0.050" | 0.141" | 14,000 LBS | 1.27 LBS |
| 40-6 | 0.500" | 0.312" | 0.312" | 2.98" | 0.475" | 0.058" | 0.156" | 21,450 LBS | 2.11 LBS |
| 50-6 | 0.625" | 0.375" | 0.400" | 3.70" | 0.594" | 0.079" | 0.200" | 34,650 LBS | 3.37 LBS |
| 60-6 | 0.750" | 0.500" | 0.469" | 4.65" | 0.712" | 0.093" | 0.234" | 49,500 LBS | 4.97 LBS |
| 80-6 | 1.000" | 0.625" | 0.625" | 6.02" | 0.950" | 0.125" | 0.312" | 88,000 LBS | 8.60 LBS |
| 100-6 | 1.250" | 0.750" | 0.750" | 7.35" | 1.188" | 0.157" | 0.375" | 133,100 LBS | 12.9 LBS |
| 120-6 | 1.500" | 1.000" | 0.875" | 9.27" | 1.425" | 0.189" | 0.437" | 187,000 LBS | 19.2 LBS |
| 140-6 | 1.750" | 1.000" | 1.000" | 10.02" | 1.663" | 0.219" | 0.500" | 242,000 LBS | 24.4 LBS |
| 160-6 | 2.000" | 1.250" | 1.125" | 11.94" | 1.901" | 0.255" | 0.563" | 302,500 LBS | 32.5 LBS |
| 180-6 | 2.250" | 1.402" | 1.406" | 16.04" | 2.067" | 0.283" | 0.687" | 480,000 LBS | 53.3 LBS |
| 200-6 | 2.500" | 1.500" | 1.562" | 17.54" | 2.354" | 0.315" | 0.781" | 630,000 LBS | 67.7 LBS |
| 240-6 | 3.000" | 1.875" | 1.875" | 21.38" | 2.768" | 0.374" | 0.936" | 910,000 LBS | 94.6 LBS |
| Chain# | Pitch (P) | (W) | (D) | (d) | (e) | (f) | (g) | (C) | (T) | (H) | (h) | Weight (LBS/ FT) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 40-8 | 0.500" | 0.313" | 0.312" | 0.156" | 0.327" | 0.374" | 0.398" | 0.567" | 0.059" | 0.472" | 0.409" | 3.18 |
| 50-8 | 0.625" | 0.375" | 0.400" | 0.200 | 0.402" | 0.457" | 0.476" | 0.713" | 0.079" | 0.591" | 0.512" | 5.44 |
| 60-8 | 0.750" | 0.500" | 0.469" | 0.235" | 0.500" | 0.563" | 0.594" | 0.898" | 0.094" | 0.713" | 0.614" | 8.08 |
| 80-8 | 1.000" | 0.625" | 0.625" | 0.313" | 0.646" | -- | 0.748" | 1.154" | 0.126" | 0.945" | 0.819" | 13.54 |
| 100-8 | 1.250" | 0.750" | 0.750" | 0.376" | 0.780" | -- | 0.894" | 1.409" | 0.157" | 1.177" | 1.024" | 20.26 |
| 120-8 | 1.500" | 1.000" | 0.875" | 0.437" | 0.980" | -- | 1.110" | 1.787" | 0.189" | 1.413" | 1.228" | 29.50 |
| 140-8 | 1.750" | 1.000" | 1.000" | 0.500" | 1.055" | -- | 1.248" | 1.925" | 0.220" | 1.650" | 1.429" | 37.68 |
| 160-8 | 2.000" | 1.250" | 1.125" | 0.563" | 1.256" | -- | 1.437" | 2.303" | 0.252" | 1.882" | 1.630" | 51.76 |
| 180-8 | 2.250" | 1.406" | 1.406" | 0.687" | 1.409" | -- | 1.638" | 2.591" | 0.280" | 2.118" | 1.835" | 66.52 |
| 200-8 | 2.500" | 1.500" | 1.562" | 0.781" | 1.535" | -- | 1.811" | 2.819" | 0.315" | 2.362" | 2.047" | 86.50 |
| 240-8 | 3.000" | 1.875" | 1.875" | 0.937" | 1.878" | -- | 2.177" | 3.457" | 0.374" | 2.815" | 2.441" | 122.44 |
| Chain# | Pitch (P) | (W) | (D) | (d) | (e) | (f) | (g) | (C) | (T) | (H) | (h) | Weight (LBS/ FT) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 40-10 | 0.500" | 0.313" | 0.312" | 0.156" | 0.327" | 0.374" | 0.398" | 0.567" | 0.059" | 0.472" | 0.409" | 3.92 |
| 50-10 | 0.625" | 0.375" | 0.400" | 0.200 | 0.402" | 0.457" | 0.476" | 0.713" | 0.079" | 0.591" | 0.512" | 6.83 |
| 60-10 | 0.750" | 0.500" | 0.469" | 0.235" | 0.500" | 0.563" | 0.594" | 0.898" | 0.094" | 0.713" | 0.614" | 10.05 |
| 80-10 | 1.000" | 0.625" | 0.625" | 0.313" | 0.646" | -- | 0.748" | 1.154" | 0.126" | 0.945" | 0.819" | 16.92 |
| 100-10 | 1.250" | 0.750" | 0.750" | 0.376" | 0.780" | -- | 0.894" | 1.409" | 0.157" | 1.177" | 1.024" | 24.92 |
| 120-10 | 1.500" | 1.000" | 0.875" | 0.437" | 0.980" | -- | 1.110" | 1.787" | 0.189" | 1.413" | 1.228" | 36.29 |
| 140-10 | 1.750" | 1.000" | 1.000" | 0.500" | 1.055" | -- | 1.248" | 1.925" | 0.220" | 1.650" | 1.429" | 46.35 |
| 160-10 | 2.000" | 1.250" | 1.125" | 0.563" | 1.256" | -- | 1.437" | 2.303" | 0.252" | 1.882" | 1.630" | 63.66 |
| 180-10 | 2.250" | 1.406" | 1.406" | 0.687" | 1.409" | -- | 1.638" | 2.591" | 0.280" | 2.118" | 1.835" | 81.82 |
| 200-10 | 2.500" | 1.500" | 1.562" | 0.781" | 1.535" | -- | 1.811" | 2.819" | 0.315" | 2.362" | 2.047" | 106.40 |
| 240-10 | 3.000" | 1.875" | 1.875" | 0.937" | 1.878" | -- | 2.177" | 3.457" | 0.374" | 2.815" | 2.441" | 150.60 |
| Chain# | Pitch (P) | (W) | (D) | (d) | (e) | (f) | (g) | (C) | (T) | (H) | (h) | Weight (LBS/ FT) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 40-12 | 0.500" | 0.313" | 0.312" | 0.156" | 0.327" | 0.374" | 0.398" | 0.567" | 0.059" | 0.472" | 0.409" | 4.71 |
| 50-12 | 0.625" | 0.375" | 0.400" | 0.200 | 0.402" | 0.457" | 0.476" | 0.713" | 0.079" | 0.591" | 0.512" | 8.20 |
| 60-12 | 0.750" | 0.500" | 0.469" | 0.235" | 0.500" | 0.563" | 0.594" | 0.898" | 0.094" | 0.713" | 0.614" | 12.06 |
| 80-12 | 1.000" | 0.625" | 0.625" | 0.313" | 0.646" | -- | 0.748" | 1.154" | 0.126" | 0.945" | 0.819" | 20.31 |
| 100-12 | 1.250" | 0.750" | 0.750" | 0.376" | 0.780" | -- | 0.894" | 1.409" | 0.157" | 1.177" | 1.024" | 29.91 |
| 120-12 | 1.500" | 1.000" | 0.875" | 0.437" | 0.980" | -- | 1.110" | 1.787" | 0.189" | 1.413" | 1.228" | 43.55 |
| 140-12 | 1.750" | 1.000" | 1.000" | 0.500" | 1.055" | -- | 1.248" | 1.925" | 0.220" | 1.650" | 1.429" | 55.62 |
| 160-12 | 2.000" | 1.250" | 1.125" | 0.563" | 1.256" | -- | 1.437" | 2.303" | 0.252" | 1.882" | 1.630" | 76.39 |
| 180-12 | 2.250" | 1.406" | 1.406" | 0.687" | 1.409" | -- | 1.638" | 2.591" | 0.280" | 2.118" | 1.835" | 98.19 |
| 200-12 | 2.500" | 1.500" | 1.562" | 0.781" | 1.535" | -- | 1.811" | 2.819" | 0.315" | 2.362" | 2.047" | 127.68 |
| 240-12 | 3.000" | 1.875" | 1.875" | 0.937" | 1.878" | -- | 2.177" | 3.457" | 0.374" | 2.815" | 2.441" |
180.72
|
Heavy-Duty roller chains are also commonly referred to as heavy roller chain or heavy-duty roller chain. Something important to note about these chains is that they utilize thicker side-plates than standard chains, this means that single-strand (simplex) heavy roller chain will run on the same sprockets as standard (excluding double-single type) but double strand (duplex) heavy roller chains require specially manufactured sprockets due to the need of increased width between the sets of teeth.
| Chain Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| #25H | 0.250" | 0.125" | 0.130" | 0.306" | 0.228" | 0.039" | 0.091" | 0.12 LBS |
| #35H | 0.375" | 0.188" | 0.200" | 0.456" | 0.356" | 0.060" | 0.141" | 0.36 LBS |
| #40H | 0.500" | 0.312" | 0.312" | 0.642" | 0.475" | 0.079" | 0.156" | 0.59 LBS |
| #50H | 0.625" | 0.375" | 0.400" | 0.794" | 0.594" | 0.093" | 0.200" | 0.75 LBS |
| #60H | 0.750" | 0.500" | 0.469" | 0.994" | 0.712" | 0.125" | 0.234" | 1.20 LBS |
| #80H | 1.000" | 0.625" | 0.625" | 1.290" | 0.950" | 0.157" | 0.312" | 1.96 LBS |
| #100H | 1.250" | 0.750" | 0.750" | 1.578" | 1.188" | 0.189" | 0.375" | 2.80 LBS |
| #120H | 1.500" | 1.000" | 0.875" | 1.966" | 1.425" | 0.219" | 0.437" | 4.00 LBS |
| #140H | 1.750" | 1.000" | 1.000" | 2.132" | 1.663" | 0.250" | 0.500" | 5.40 LBS |
| #160H | 2.000" | 1.250" | 1.125" | 2.564" | 1.901" | 0.281" | 0.563" | 7.09 LBS |
| #180H | 2.250" | 1.406" | 1.406" | 2.808" | 2.130" | 0.312" | 0.687" | 11.08 LBS |
| #200H | 2.500" | 1.500" | 1.562" | 3.160" | 2.376" | 0.375" | 0.782" | 13.54 LBS |
| #240H | 3.000" | 1.875" | 1.875" | 3.772" | 2.850" | 0.500" | 0.937" | 19.96 LBS |
Duplex Heavy Roller Chains:
| Chain Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | (A) | (B) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|---|
| 60-2H | 0.750" | 0.500" | 0.469" | 1.090" | 1.140" | 0.712" | 0.125" | 0.234" | 2.31 LBS |
| 80-2H | 1.000" | 0.625" | 0.625" | 1.360" | 1.420" | 0.950" | 0.157" | 0.312" | 3.97 LBS |
| 100-2H | 1.250" | 0.750" | 0.750" | 1.630" | 1.736" | 1.188" | 0.187" | 0.375" | 6.07 LBS |
| 120-2H | 1.500" | 1.000" | 0.875" | 2.014" | 2.171" | 1.425" | 0.219" | 0.437" | 8.67 LBS |
| 140-2H | 1.750" | 1.000" | 1.000" | 2.163" | 2.343" | 1.663" | 0.250" | 0.500" | 11.01 LBS |
| 160-2H | 2.000" |
1.250"
|
1.125" | 2.555" | 2.736" | 1.901" | 0.281" | 0.563" | 14.64 LBS |
| 200-2H | 2.500" | 1.501" | 1.562" | 3.230" | 3.437" | 2.376" | 0.375" | 0.782" |
24.51 LBS
|
Single Strand Cotterd Roller Chains
| Economy Plus | General Duty Plus | Premier Series |
|---|---|---|
| 60-1 | 60-1 | 60-1 |
| 80-1 | 80-1 | 80-1 |
| 100-1 | 100-1 | 100-1 |
| 120-1 | 120-1 | 120-1 |
| 140-1 | 140-1 | 140-1 |
| 160-1 | 160-1 | 160-1 |
| 180-1 | 180-1 | 180-1 |
| 200-1 | 200-1 | 200-1 |
| 240-1 | 240-1 | 240-1 |
Double Strand Cotterd Roller Chains
| Economy Plus | General Duty Plus | Premier Series |
|---|---|---|
| -- | 60-2 | 60-2 |
| 80-2 | 80-2 | 80-2 |
| 100-2 | 100-2 | 100-2 |
| 120-2 | 120-2 | 120-2 |
| 140-2 | 140-2 | 140-2 |
| 160-2 | 160-2 | 160-2 |
| 180-2 | 180-2 | 180-2 |
| 200-2 | 200-2 | 200-2 |
| 240-2 | -- | 240-2 |
Triple Strand Cotterd Roller Chains
| Economy Plus | General Duty Plus | Premier Series |
|---|---|---|
| -- | -- | 60-3 |
| 80-3 | -- | 80-3 |
| 100-3 | -- | 100-3 |
Quad Strand Cotterd Roller Chains
| Economy Plus | General Duty Plus | Premier Series |
|---|---|---|
| 60-4 | -- | 60-4 |
| 80-4 | -- | 80-4 |
| 100-4 | -- | 100-4 |
Five Strand Cotterd Roller Chains
| Economy Plus | General Duty Plus | Premier Series |
|---|---|---|
| -- | -- | 60-5 |
| -- | -- | 80-5 |
| -- | -- | 100-5 |
| -- | -- | 120-5 |
| -- | -- | 140-5 |
| -- | -- | 160-5 |
| -- | -- | 200-5 |
Six Strand Cotterd Roller Chains
| Economy Plus | General Duty Plus | Premier Series | API Series |
|---|---|---|---|
| -- | -- | 60-6 | -- |
| -- | -- | 80-6 | -- |
| -- | -- | 100-6 | 100-6 |
| -- | -- | 120-6 | -- |
| -- | -- | 160-6 | -- |
| -- | -- | -- | -- |
Eight Strand Cotterd Roller Chains
| API Series |
|---|
| 120-8 |
Double Pitch Cotterd Roller Chains
| Standard | Oversized Roller |
|---|---|
| C2060H | C2062H |
| C2080H | C2082H |
| C2100H | C2102H |
| C2120H | C2122H |
| C2160H |
C2162H |
ANSI Standard Roller Chain By Size
Starting from ANSI #25 and going through #240 size roller chains the below charts show dimensions and information about each size.| Size | Pitch (P) | Bushing Width (W) | Bushing Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 25-1 | 0.25" | 0.125" | 0.130" | 0.307" | 0.232" | 0.028" | 0.091" | 0.09 LBS |
| 25-2 | 0.25" | 0.125" | 0.130" | 0.567" | 0.232" | 0.028" | 0.091" | 0.17 LBS |
| 25-3 | 0.25" | 0.125" | 0.130" | 0.819" | 0.232" | 0.028" | 0.091" | 0.26 LBS |
| 25-4 | 0.25" | 0.125" | 0.130" | 1.071" | 0.232" | 0.028" | 0.091" | 0.35 LBS |
| 25-5 | 0.25" | 0.125" | 0.130" | 1.327" | 0.232" | 0.028" | 0.091" | 0.44 LBS |
| Size | Pitch (P) | Bushing Width (W) | Bushing Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 35-1 | 0.375" | 0.188" | 0.200" | 0.472" | 0.354" | 0.049" | 0.141" | 0.21 LBS |
| 35-2 | 0.375" | 0.188" | 0.200" | 0.870" | 0.354" | 0.049" | 0.141" | 0.46 LBS |
| 35-3 | 0.375" | 0.188" | 0.200" | 1.268" | 0.354" | 0.049" | 0.141" | 0.70 LBS |
| 35-4 | 0.375" | 0.188" | 0.200" | 1.665" | 0.354" | 0.049" | 0.141" | 0.95 LBS |
| 35-5 | 0.375" | 0.188" | 0.200" | 2.067" | 0.354" | 0.049" | 0.141" | 1.19 LBS |
| Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 41-1 | 0.50" | 0.250" | 0.306" | 0.539" | 0.378" | 0.047" | 0.141" | 0.26 LBS |
| Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 40-1 | 0.50" | 0.312" | 0.312" | 0.650" | 0.472" | 0.059" | 0.156" | 0.42 LBS |
| 40-2 | 0.50" | 0.312" | 0.312" | 1.220" | 0.472" | 0.059" | 0.156" | 0.80 LBS |
| 40-3 | 0.50" | 0.312" | 0.312" | 1.787" | 0.472" | 0.059" | 0.156" | 1.19 LBS |
| 40-4 | 0.50" | 0.312" | 0.312" | 2.358" | 0.472" | 0.059" | 0.156" | 1.59 LBS |
| 40-5 | 0.50" | 0.312" | 0.312" | 2.925" | 0.472" | 0.059" | 0.156" | 1.98 LBS |
| 40-6 | 0.50" | 0.312" | 0.312" | -- | 0.472" | 0.059" | 0.156" | 2.40 LBS |
| Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 50-1 | 0.625" | 0.375" | 0.400" | 0.800" | 0.591" | 0.079" | 0.200" | 0.713 LBS |
| 50-2 | 0.625" | 0.375" | 0.400" | 1.513" | 0.591" | 0.079" | 0.200" | 1.406 LBS |
| 50-3 | 0.625" | 0.375" | 0.400" | 2.230" | 0.591" | 0.079" | 0.200" | 2.099 LBS |
| 50-4 | 0.625" | 0.375" | 0.400" | 2.943" | 0.591" | 0.079" | 0.200" | 2.792 LBS |
| 50-5 | 0.625" | 0.375" | 0.400" | 3.656" | 0.591" | 0.079" | 0.200" | 3.485 LBS |
| 50-6 | 0.625" | 0.375" | 0.400" | 4.369" | 0.591" | 0.079" | 0.200" | 4.171 LBS |
| Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 60-1 | 0.75" | 0.50" | 0.469" | 0.994" | 0.712" | 0.093" | 0.234" | 0.97 LBS |
| 60-2 | 0.75" | 0.50" | 0.469" | 1.890" | 0.712" | 0.093" | 0.234" | 2.04 LBS |
| 60-3 | 0.75" | 0.50" | 0.469" | 2.794" | 0.712" | 0.093" | 0.234" | 3.02 LBS |
| 60-4 | 0.75" | 0.50" | 0.469" | 3.690" | 0.712" | 0.093" | 0.234" | 3.97 LBS |
| 60-5 | 0.75" | 0.50" | 0.469" | 4.598" | 0.712" | 0.093" | 0.234" | 5.05 LBS |
| 60-6 | 0.75" | 0.50" | 0.469" | 5.496" | 0.712" | 0.093" | 0.234" | 6.136 LBS |
| Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 80-1 | 1.00" | 0.625" | 0.625" | 1.289" | 0.949" | 0.126" | 0.313" | 1.87 LBS |
| 80-2 | 1.00" | 0.625" | 0.625" | 2.447" | 0.949" | 0.126" | 0.313" | 3.74 LBS |
| 80-3 | 1.00" | 0.625" | 0.625" | 3.602" | 0.949" | 0.126" | 0.313" | 5.54 LBS |
| 80-4 | 1.00" | 0.625" | 0.625" | 4.756" | 0.949" | 0.126" | 0.313" | 7.34 LBS |
| 80-5 | 1.00" | 0.625" | 0.625" | 5.910" | 0.949" | 0.126" | 0.313" | 9.14 LBS |
| 80-6 | 1.00" | 0.625" | 0.625" | 7.065" | 0.949" | 0.126" | 0.313" | 10.94 LBS |
| Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 100-1 | 1.250" | 0.750" | 0.750" | 1.698" | 1.185" | 0.158" | 0.375" | 2.80 LBS |
| 100-2 | 1.250" | 0.750" | 0.750" | 3.109" | 1.185" | 0.158" | 0.375" | 5.60 LBS |
| 100-3 | 1.250" | 0.750" | 0.750" | 4.519" | 1.185" | 0.158" | 0.375" | 8.34 LBS |
| 100-4 | 1.250" | 0.750" | 0.750" | 5.930" | 1.185" | 0.158" | 0.375" | 11.01 LBS |
| 100-5 | 1.250" | 0.750" | 0.750" | 7.340" | 1.185" | 0.158" | 0.375" | 13.81 LBS |
| 100-6 | 1.250" | 0.750" | 0.750" | 8.751" | 1.185" | 0.158" | 0.375" | 16.54 LBS |
| Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 120-1 | 1.500" | 1.000" | 0.875" | 2.124" | 1.425" | 0.189" | 0.438" | 4.14 LBS |
| 120-2 | 1.500" | 1.000" | 0.875" | 3.897" | 1.425" | 0.189" | 0.438" | 8.14 LBS |
| 120-3 | 1.500" | 1.000" | 0.875" | 5.685" | 1.425" | 0.189" | 0.438" | 12.21 LBS |
| 120-4 | 1.500" | 1.000" | 0.875" | 7.474" | 1.425" | 0.189" | 0.438" | 16.34 LBS |
| 120-5 | 1.500" | 1.000" | 0.875" | 9.263" | 1.425" | 0.189" | 0.438" | 20.41 LBS |
| 120-6 | 1.500" | 1.000" | 0.875" | 11.052" | 1.425" | 0.189" | 0.438" | 24.55 LBS |
| Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 140-1 | 1.750" | 1.000" | 1.000" | 2.321" | 1.663" | 0.220" | 0.500" | 5.136 LBS |
| 140-2 | 1.750" | 1.000" | 1.000" | 4.247" | 1.663" | 0.220" | 0.500" | 10.072 LBS |
| 140-3 | 1.750" | 1.000" | 1.000" | 6.174" | 1.663" | 0.220" | 0.500" | 15.074 LBS |
| 140-4 | 1.750" | 1.000" | 1.000" | 8.101" | 1.663" | 0.220" | 0.500" | 20.077 LBS |
| 140-5 | 1.750" | 1.000" | 1.000" | 10.027" | 1.663" | 0.220" | 0.500" | 25.013 LBS |
| 140-6 | 1.750" | 1.000" | 1.000" | 11.954" | 1.663" | 0.220" | 0.500" | 30.015 LBS |
| Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 160-1 | 2.000" | 1.250" | 1.125" | 2.723" | 1.899" | 0.252" | 0.563" | 6.603 LBS |
| 160-2 | 2.000" | 1.250" | 1.125" | 5.027" | 1.899" | 0.252" | 0.563" | 13.073 LBS |
| 160-3 | 2.000" | 1.250" | 1.125" | 7.332" | 1.899" | 0.252" | 0.563" | 19.543 LBS |
| 160-4 | 2.000" | 1.250" | 1.125" | 9.637" | 1.899" | 0.252" | 0.563" | 25.946 LBS |
| 160-5 | 2.000" | 1.250" | 1.125" | 11.942" | 1.899" | 0.252" | 0.563" | 32.416 LBS |
| 160-6 | 2.000" | 1.250" | 1.125" | 14.247" | 1.899" | 0.252" | 0.563" | 38.886 LBS |
| Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 180-1 | 2.250" | 1.406" | 1.406" | 3.120" | 2.135" | 0.284" | 0.688" | 8.978 LBS |
| 180-2 | 2.250" | 1.406" | 1.406" | 5.713" | 2.135" | 0.284" | 0.688" | 17.669 LBS |
| 180-3 | 2.250" | 1.406" | 1.406" | 8.306" | 2.135" | 0.284" | 0.688" | 25.526 LBS |
| 180-4 | 2.250" | 1.406" | 1.406" | 10.898" | 2.135" | 0.284" | 0.688" | 33.964 LBS |
| 180-5 | 2.250" | 1.406" | 1.406" | 13.491" | 2.135" | 0.284" | 0.688" | 42.421 LBS |
| 180-6 | 2.250" | 1.406" | 1.406" | 16.083" | 2.135" | 0.284" | 0.688" | 50.825 LBS |
| Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 200-1 | 2.500" | 1.500" | 1.563" | 3.361" | 2.368" | 0.315" | 0.782" | 11.07 LBS |
| 200-2 | 2.500" | 1.500" | 1.563" | 6.182" | 2.368" | 0.315" | 0.782" | 21.68 LBS |
| 200-3 | 2.500" | 1.500" | 1.563" | 9.003" | 2.368" | 0.315" | 0.782" | 32.42 LBS |
| 200-4 | 2.500" | 1.500" | 1.563" | 11.824" | 2.368" | 0.315" | 0.782" | 43.09 LBS |
| 200-5 | 2.500" | 1.500" | 1.563" | 14.645" | 2.368" | 0.315" | 0.782" | 53.76 LBS |
| 200-6 | 2.500" | 1.500" | 1.563" | 17.466" | 2.368" | 0.315" | 0.782" | 64.43 LBS |
| Size | Pitch (P) | Roller Width (W) | Roller Diameter (D) | Overall Width (A) | Plate Height (H) | Plate Thickness (T) | Pin Diameter (E) | Weight (Per Ft) |
|---|---|---|---|---|---|---|---|---|
| 240-1 | 3.00" | 1.875" | 1.875" | 4.125" | 2.850" | 0.375" | 0.938" | 16.542 LBS |
| 240-2 | 3.00" | 1.875" | 1.875" | 7.585" | 2.850" | 0.375" | 0.938" | 32.683 LBS |
| 240-3 | 3.00" | 1.875" | 1.875" | 11.044" | 2.850" | 0.375" | 0.938" | 48.758 LBS |
| 240-4 | 3.00" | 1.875" | 1.875" | 14.503" | 2.850" | 0.375" | 0.938" | 64.832 LBS |
| 240-5 | 3.00" | 1.875" | 1.875" | 17.962" | 2.850" | 0.375" | 0.938" | 89.907 LBS |
| 240-6 | 3.00" | 1.875" | 1.875" | 21.422" | 2.850" | 0.375" | 0.938" | 96.848 LBS |
Corrosion Resistant Roller Chain
In corrosion-resistant roller chains, we stock a full line stainless steel roller chain in 304-grade and 316-grade. A nickel-plated roller chain is an option for applications that do not require stainless steel chain. All of our nickel-plated roller chains are manufactured in a way that prevents chipping and promotes maximum working life. We also carry dacromet and zinc-coated roller chains for qualified applications.
Non-Standard & Specialty Chains
We stock and supply the industry's broadest range of non-standard and specialty roller chains! Our inventory consists of agricultural roller chains, double pitch roller chains, metric roller chains, coupling chains, DHA series chains, low-temperature roller chains, hollow pin chain, lube-free roller chain, roller-less chains, plastic roller chain, straight sidebar roller chain, poly-steel chain, O-Ring roller chain, API Certified roller chains, Super Series roller chain, Double Capacity roller chain, low noise roller chain, titanium roller chain, and side-bow roller chain.
Some of Our Partners
At USA Roller Chain and Sprockets, we understand the value of solid partnerships with great companies. This helps us provide our customers with better service, better pricing, and brand-specific chains upon request. Our vendor network consists of 1,000+ suppliers, meaning we can supply any power transmission product needed. We also have an on-site machine shop, custom conveyor manufacturing, and an extensive database of product information so we can help our customers with everything they need.
How to Source Roller Chain
Order Online
Add products to your cart from their individual pages or the specification table links, and then proceed to checkout.
Submit a Quote Request
Chat With Our Experts
