Skip to content
V-Guide Wheel Roller Bearings
V-groove guide wheel bearings are utilized in a range of linear and rotary motion applications. These bearings provide a low-noise, low friction, smooth, and long-lasting solution for linear movement systems. V-guide wheel roller bearings utilize precision tracks and accessories for optimal operation with minimal energy consumption. The 90° dual-vee design allows for a natural whipping action, clearing debris and optimally functioning the system. We offer these bearings in a wide range of configurations and materials to suit almost any application. Utilizing a dual-vee bearing system creates an easy to maintain and economical method for movement. We also stock and supply all of the different track configurations, bushings, covers, and more! For additional information or to get a quote on v-guide wheel roller bearings, contact our customer support team, and we will be happy to assist you!V-Guide Wheel Roller Bearing Types
Note: The below chart shows the standard options for dualVee bearings; we also supply custom solutions upon request.|
Carbon Steel
 (W_, W_X) |
Stainless Steel
 (W_SSX) |
Stainless steel (Hi-Temp)
 (W_SS227) |
Stainless Steel (Low Temp)
 (W_SS300) |
Steel Studded Assemblies
 (SWA, SWS) |
|---|---|---|---|---|
Stainless Steel Washdown (WDW_SSX) |
Stainless Steel Vacuum (W_SSVAC) |
Stainless Steel (Food/ Pharma Grade) (W_SSXH1) |
Polymer Studded Assemblies (SWI) |
-- |
V-Guide Wheel Roller Bearing Information
|
Wheel Version
|
Part # Scheme
|
Available Sizes
|
Protection
|
Wheel Material
|
Ball Retainer Material
|
Grease
|
Temperature Range (°F)
|
|---|---|---|---|---|---|---|---|
| Original Guide Wheels Carbon | W_ | 0, 1 | Shield | 52100 Steel | Nylon 6,6 | Shell Alvania EP2 | -31° to +248° |
| Original Guide Wheels Carbon | W_X | 0, 1, 2, 3, 4, 4XL | Seal / Shield | 52100 Steel | Nylon 6,6 | Shell Alvania EP2 | -22° to +212° |
| Original Guide Wheels Stainless | W_SSX | 1 | Seal | 440C Stainless | Nylon 6,6 | Shell Alvania EP2 | -22° to +212° |
| Original Guide Wheels Stainless | W_SSX | 2, 3, 4, 4XL | Seal / Shield | 440C Stainless | Nylon 6,6 | Shell Alvania EP2 | -22° to +212° |
| Studded Polymer Wheels | SWI_P | 0, 1, 2 | Shield | Polymer (overmold) 440C Stainless | 300 Stainless |
Kluberplex
BEM034-132 |
-4° to +248° |
| Vacuum Wheels | W_SSVAC | 1, 2 | Shield | 440C Stainless | 304 Stainless |
Lubcon
Ultratherm 2000 |
-31° to +482° |
| Washdown Wheels | WDW_SSX | 2, 3 | Double Seal | 440C Stainless | Nylon 6,6 |
Klubersynth
UH1 14-151 |
-22° to +212° |
| Food / Pharma Wheels | W_SSXH1 | 2, 3 | Seal / Shield | 440C Stainless | Nylon 6,6 |
Klubersynth
UH1 14-151 |
-22° to +176° |
| Extreme Temperature Wheels | w_SS300 | 0, 1, 2, 3, 4 | Shield | 440C Stainless | 304 Stainless |
Krytox
® GPL227 |
-22° to +500° |
| Extreme Temperature Wheels | w_SS300 | 0, 1, 2, 3, 4 | Shield | 440C Stainless | 304 Stainless |
Kluber
Isoflex PDL 300A |
-94° to +230° |
V-Groove Guide Wheel Sizes
The below charts show standard stock sizes in each configuration, for custom bearings please contact us.
The original guide wheels are designated with W_ and W_X for the part numbers. W_ part numbers are Shielded, and W_X part numbers are Sealed/ Shielded.
| Part # | Bearing Size | Outside Diameter (D) | Width (W) | Bore Size (B) | Vee Inside Radius (VRI) | Vee Outside Radius (VRO) | Weight (G) |
|---|---|---|---|---|---|---|---|
| W0 | 0 | 0.584" | 0.250" | 0.1575" +0.0000"/-0.0003" | 0.234" | 0.359" | 5.1 |
| W1 | 1 | 0.771" | 0.310" | 0.1875" +0.0000"/-0.0003" | 0.313" | 0.468" | 11.1 |
| W0X | 0 | 0.584" | 0.250" | 0.1575" +0.0000"/-0.0003" | 0.234" | 0.359" | 5.1 |
| W1X | 1 | 0.771" | 0.310" | 0.1875" +0.0000"/-0.0003" | 0.313" | 0.468" | 11.1 |
| W2X | 2 | 1.210" | 0.438" | 0.3750" +0.0000"/-0.0003" | 0.500" | 0.719" | 39.0 |
| W3X | 3 | 1.803" | 0.625" | 0.4724 +0.0000"/-0.0003" | 0.750" | 1.063" | 130.2 |
| W4X | 4 | 2.360" | 0.750" | 0.5906 +0.0000"/-0.0003" | 1.000" | 1.375" | 276.0" |
| W4XLX | 4XL | 2.968" | 1.000" | 0.8661 +0.0000"/-0.0003" | 1.250" | 1.750" | 575.0" |
Stainless steel original guide wheels are made for corrosive conditions and are commonly found in medical, scientific, food, and beverage applications; the wheel bearing is made from 440C stainless steel, and the retainers are made from nylon 6,6.
| Part # | Bearing Size | Outside Diameter (D) | Width (W) | Bore Size (B) | Vee Inside Radius (VRI) | Vee Outside Radius (VRO) | Weight (G) |
|---|---|---|---|---|---|---|---|
| W1SSX | 1 | 0.771" | 0.310" | 0.1875" +0.0000"/-0.0003" | 0.313" | 0.468" | 11.1 |
| W2SSX | 2 | 1.210" | 0.438" | 0.3750" +0.0000"/-0.0003" | 0.500" | 0.719" | 39.0 |
| W3SSX | 3 | 1.803" | 0.625" | 0.4724 +0.0000"/-0.0003" | 0.750" | 1.063" | 130.2 |
| W4SSX | 4 | 2.360" | 0.750" | 0.5906 +0.0000"/-0.0003" | 1.000" | 1.375" | 276.0" |
| W4XLSSX | 4XL | 2.968" | 1.000" | 0.8661 +0.0000"/-0.0003" | 1.250" | 1.750" |
575.0"
|
Studded polymer wheels are utilized in corrosive environments or applications requiring low noise bearings. Some of these applications include electronics, scientific equipment, and medical applications.
| Part # | Bearing Size | Outside Diameter (D) | Width (W) | Bore Size (B) | Vee Inside Radius (VRI) | Vee Outside Radius (VRO) | Weight (G) |
|---|---|---|---|---|---|---|---|
| SWI0P | 0 | 0.584" | 0.250" | 0.1575" +0.0000"/-0.0003" | 0.234" | 0.359" | 5.1 |
| SWI1P | 1 | 0.771" | 0.310" | 0.1875" +0.0000"/-0.0003" | 0.313" | 0.468" | 11.1 |
| SWI2P | 2 | 1.210" | 0.438" | 0.3750" +0.0000"/-0.0003" | 0.500" | 0.719" | 39.0 |
Vacuum wheels are made for vacuum environments and are typically found in material science applications.
| Part # | Bearing Size | Outside Diameter (D) | Width (W) | Bore Size (B) | Vee Inside Radius (VRI) | Vee Outside Radius (VRO) | Weight (G) |
|---|---|---|---|---|---|---|---|
| W1SSVAC | 1 | 0.771" | 0.310" | 0.1875" +0.0000"/-0.0003" | 0.313" | 0.468" | 11.1 |
| W2SSVAC | 2 | 1.210" | 0.438" | 0.3750" +0.0000"/-0.0003" | 0.500" | 0.719" |
39.0
|
Washdown V-Guide bearing wheels are made from high-quality 440C stainless steel and have Nylon ball retainers. These wheels are made for washdown equipment, food processing, and pharmaceutical equipment.
| Part # | Bearing Size | Outside Diameter (D) | Width (W) | Bore Size (B) | Vee Inside Radius (VRI) | Vee Outside Radius (VRO) | Weight (G) |
|---|---|---|---|---|---|---|---|
| WDW2SSX | 2 | 1.210" | 0.438" | 0.3750" +0.0000"/-0.0003" | 0.500" | 0.719" | 39.0 |
| WDW3SSX | 3 | 1.803" | 0.625" | 0.4724 +0.0000"/-0.0003" | 0.750" | 1.063" | 130.2 |
These v-guide wheel bearings are food grade and pharisaical grade; they are utilized in good and pharma processing and handling equipment.
| Part # | Bearing Size | Outside Diameter (D) | Width (W) | Bore Size (B) | Vee Inside Radius (VRI) | Vee Outside Radius (VRO) | Weight (G) |
|---|---|---|---|---|---|---|---|
| W2SSXH1 | 2 | 1.210" | 0.438" | 0.3750" +0.0000"/-0.0003" | 0.500" | 0.719" | 39.0 |
| W3SSXH1 | 3 | 1.803" | 0.625" | 0.4724 +0.0000"/-0.0003" | 0.750" | 1.063" | 130.2 |
Extreme temperature wheels are made for high temp or low temp applications. Common applications include aerospace, refrigeration, baking, welding, and cutters.
High-Temperature Wheels:
Low-Temperature Wheels:
High-Temperature Wheels:
| Part # | Bearing Size | Outside Diameter (D) | Width (W) | Bore Size (B) | Vee Inside Radius (VRI) | Vee Outside Radius (VRO) | Weight (G) |
|---|---|---|---|---|---|---|---|
| W0SS227 | 0 | 0.584" | 0.250" | 0.1575" +0.0000"/-0.0003" | 0.234" | 0.359" | 5.1 |
| W1SS227 | 1 | 0.771" | 0.310" | 0.1875" +0.0000"/-0.0003" | 0.313" | 0.468" | 11.1 |
| W2SS227 | 2 | 1.210" | 0.438" | 0.3750" +0.0000"/-0.0003" | 0.500" | 0.719" | 39.0 |
| W3SS227 | 3 | 1.803" | 0.625" | 0.4724 +0.0000"/-0.0003" | 0.750" | 1.063" | 130.2 |
| W4SS227 | 4 | 2.360" | 0.750" | 0.5906 +0.0000"/-0.0003" | 1.000" | 1.375" | 276.0" |
| Part # | Bearing Size | Outside Diameter (D) | Width (W) | Bore Size (B) | Vee Inside Radius (VRI) | Vee Outside Radius (VRO) | Weight (G) |
|---|---|---|---|---|---|---|---|
| W0SS300 | 0 | 0.584" | 0.250" | 0.1575" +0.0000"/-0.0003" | 0.234" | 0.359" | 5.1 |
| W1SS300 | 1 | 0.771" | 0.310" | 0.1875" +0.0000"/-0.0003" | 0.313" | 0.468" | 11.1 |
| W2SS300 | 2 | 1.210" | 0.438" | 0.3750" +0.0000"/-0.0003" | 0.500" | 0.719" | 39.0 |
| W3SS300 | 3 | 1.803" | 0.625" | 0.4724 +0.0000"/-0.0003" | 0.750" | 1.063" | 130.2 |
| W4SS300 | 4 | 2.360" | 0.750" | 0.5906 +0.0000"/-0.0003" | 1.000" | 1.375" |
276.0"
|
SWA series guide wheels are studded with a through-hole.
Concentric Studded Wheels:
Eccentric Studded Wheels:
Concentric Studded Wheels:
| Part # | Bearing Size | Adjustability | Overall Length (B) | Wheel Diameter (C) | Journal Diameter (D1) | Journal Length (E) | Thread Length (F) | Thread (G) | Hex Thickness (H2) | Vee Height (J) | Hex Size (K) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SWAC0 | 0 | Concentric | 0.74" | Ø0.584" | Ø.1566" | .39" | .24" | M4 x 0.7 | .080" | .205" | .433" |
| SWAC1 | 1 | Concentric | 1.00" | Ø.771" | Ø.2352" | .59" | .35" | M6 x 1.0 | .083" | .238" | .472" |
| SWAC0X | 0 | Concentric | 0.74" | Ø0.584" | Ø.1566" | .39" | .24" | M4 x 0.7 | .080" | .205" | .433" |
| SWAC1X | 1 | Concentric | 1.00" | Ø.771" | Ø.2352" | .59" | .35" | M6 x 1.0 | .083" | .238" | .472" |
| SWAC2X | 2 | Concentric | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAC3X | 3 | Concentric | 1.967" | Ø1.803" | Ø.4711" | 1.18" | .71" | M12 X 1.75 | .137" | .450" | .748" |
| SWAC4X | 4 | Concentric | 2.477" | Ø2.360" | Ø.6284" | 1.58" | .95" | M16 X 2.0 | .122" | .497" | .866" |
| SWAC0SSX | 0 | Concentric | 0.74" | Ø0.584" | Ø.1566" | .39" | .24" | M4 x 0.7 | .080" | .205" | .433" |
| SWAC1SSX | 1 | Concentric | 1.00" | Ø.771" | Ø.2352" | .59" | .35" | M6 x 1.0 | .083" | 238" | .472" |
| SWAC2SSX | 2 | Concentric | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAC3SSX | 3 | Concentric | 1.967" | Ø1.803" | Ø.4711" | 1.18" | .71" | M12 X 1.75 | .137" | .450" | .748" |
| SWAC4SSX | 4 | Concentric | 2.477" | Ø2.360" | Ø.6284" | 1.58" | .95" | M16 X 2.0 | .122" | .497" | .866" |
| SWAC2SSH1 | 2 | Concentric | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAC2SSH2 | 2 | Concentric | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAC0SS227 | 0 | Concentric | 0.74" | Ø0.584" | Ø.1566" | .39" | .24" | M4 x 0.7 | .080" | .205" | .433" |
| SWAC1SS227 | 1 | Concentric | 1.00" | Ø.771" | Ø.2352" | .59" | .35" | M6 x 1.0 | .083" | .238" | .472" |
| SWAC2SS227 | 2 | Concentric | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAC3SS227 | 3 | Concentric | 1.967" | Ø1.803" | Ø.4711" | 1.18" | .71" | M12 X 1.75 | .137" | .450" | .748" |
| SWAC4SS227 | 4 | Concentric | 2.477" | Ø2.360" | Ø.6284" | 1.58" | .95" | M16 X 2.0 | .122" | .497" | .866" |
| SWAC0SS300 | 0 | Concentric | 0.74" | Ø0.584" | Ø.1566" | .39" | .24" | M4 x 0.7 | .080" | .205" | .433" |
| SWAC1SS300 | 1 | Concentric | 1.00" | Ø.771" | Ø.2352" | .59" | .35" | M6 x 1.0 | .083" | .238" | .472" |
| SWAC2SS300 | 2 | Concentric | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAC3SS300 | 3 | Concentric | 1.967" | Ø1.803" | Ø.4711" | 1.18" | .71" | M12 X 1.75 | .137" | .450" | .748" |
| SWAC4SS300 | 4 | Concentric | 2.477" | Ø2.360" | Ø.6284" | 1.58" | .95" | M16 X 2.0 | .122" | .497" | .866" |
| SWAC1SSVAC | 1 | Concentric | 1.00" | Ø.771" | Ø.2352" | .59" | .35" | M6 x 1.0 | .083" | .238" | .472" |
| SWAC2SSVAC | 2 | Concentric | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWACWD2SSX | 2 | Concentric | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWACWD3SSX | 3 | Concentric | 1.967" | Ø1.803" | Ø.4711" | 1.18" | .71" | M12 X 1.75 | .137" | .450" | .748" |
| Part # | Bearing Size | Adjustability | Eccentric Offset (A) | Overall Length (B) | Wheel Diameter (C) | Journal Diameter (D1) | Journal Length (E) | Thread Length (F) | Thread (G) | Hex Thickness (H2) | Vee Height (J) | Hex Size (K) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SWAE0 | 0 | Eccentric | 0.24" | 0.74" | Ø0.584" | Ø.1566" | .39" | .24" | M4 X 0.7 | .080" | .205" | .433" |
| SWAE1 | 1 | Eccentric | 0.24" | 1.00" | Ø.771" | Ø.2352" | .59" | .35" | M6 X 1.0 | .083" | .238" | .472" |
| SWAE0X | 0 | Eccentric | 0.24" | 0.74" | Ø0.584" | Ø.1566" | .39" | .24" | M4 X 0.7 | .080" | .205" | .433" |
| SWAE1X | 1 | Eccentric | 0.24" | 1.00" | Ø.771" | Ø.2352" | .59" | .35" | M6 X 1.0 | .083" | .238" | .472" |
| SWAE2X | 2 | Eccentric | .038" | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAE3X | 3 | Eccentric | .060" | 1.967" | Ø1.803" | Ø.4711" | 1.18" | .71" | M12 X 1.75 | .137" | .450" | .748" |
| SWAE4X | 4 | Eccentric | .060" | 2.477" | Ø2.360" | Ø.6284" | 1.58" | .95" | M16 X 2.0 | .122" | .497" | .866" |
| SWAE0SSX | 0 | Eccentric | 0.24" | 0.74" | Ø0.584" | Ø.1566" | .39" | .24" | M4 X 0.7 | .080" | .205" | .433" |
| SWAE1SSX | 1 | Eccentric | 0.24" | 1.00" | Ø.771" | Ø.2352" | .59" | .35" | M6 X 1.0 | .083" | .238" | .472" |
| SWAE2SSX | 2 | Eccentric | .038" | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAE3SSX | 3 | Eccentric | .060" | 1.967" | Ø1.803" | Ø.4711" | 1.18" | .71" | M12 X 1.75 | .137" | .450" | .748" |
| SWAE4SSX | 4 | Eccentric | 060" | 2.477" | Ø2.360" | Ø.6284" | 1.58" | .95" | M16 X 2.0 | .122" | .497" | .866" |
| SWAE2SSH1 | 2 | Eccentric | .038" | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAE3SSH1 | 3 | Eccentric | .060" | 1.967" | Ø1.803" | Ø.4711" | 1.18" | .71" | M12 X 1.75 | .137" | .450" | .748" |
| SWAE0SS227 | 0 | Eccentric | 0.24" | 0.74" | Ø0.584" | Ø.1566" | .39" | .24" | M4 X 0.7 | .080" | .205" | .433" |
| SWAE1SS227 | 1 | Eccentric | 0.24" | 1.00" | Ø.771" | Ø.2352" | .59" | .35" | M6 X 1.0 | .083" | .238" | .472" |
| SWAE2SS227 | 2 | Eccentric | .038" | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAE3SS227 | 3 | Eccentric | .060" | 1.967" | Ø1.803" | Ø.4711" | 1.18" | .71" | M12 X 1.75 | .137" | .450" | .748" |
| SWAE4SS227 | 4 | Eccentric | 060" | 2.477" | Ø2.360" | Ø.6284" | 1.58" | .95" | M16 X 2.0 | .122" | .497" | .866" |
| SWAE0SS300 | 0 | Eccentric | 0.24" | 0.74" | Ø0.584" | Ø.1566" | .39" | .24" | M4 X 0.7 | .080" | .205" | .433" |
| SWAE1SS300 | 1 | Eccentric | 0.24" | 1.00" | Ø.771" | Ø.2352" | .59" | .35" | M6 X 1.0 | .083" | .238" | .472" |
| SWAE2SS300 | 2 | Eccentric | .038" | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAE3SS300 | 3 | Eccentric | .060" | 1.967" | Ø1.803" | Ø.4711" | 1.18" | .71" | M12 X 1.75 | .137" | .450" | .748" |
| SWAE4SS300 | 4 | Eccentric | 060" | 2.477" | Ø2.360" | Ø.6284" | 1.58" | .95" | M16 X 2.0 | .122" | .497" | .866" |
| SWAE1SSVAC | 1 | Eccentric | 0.24" | 1.00" | Ø.771" | Ø.2352" | .59" | .35" | M6 X 1.0 | .083" | .238" | .472" |
| SWAE2SSVAC | 2 | Eccentric | .038" | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAEWD2SSX | 2 | Eccentric | .038" | 1.54" | Ø1.210" | Ø.3926" | .98" | .59" | M10 X 1.5 | .104" | .323" | .551" |
| SWAEWD3SSX | 3 | Eccentric | .060" | 1.967" | Ø1.803" | Ø.4711" | 1.18" | .71" | M12 X 1.75 | .137" | .450" | .748" |
SWS Series studied v-guide wheel bearings are supplied with a standard stud extension in concentric and eccentric adjustability types.
Concentric Studded Wheels:
Eccentric Studded Wheels:
Concentric Studded Wheels:
| Part # | Bearing Size | Adjustability | Thread (D1) | Thread Length (E) | Overall Length (F) | Wheel Dia. (G) | Journal Length (H) | Hex Thickness (J2) | Vee Height (K) | Hex Size (L) | Opt. End Hex Size (M3) | Material Protrusion (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SWSC0 | 0 | Concentric | M6 x 1.0 | .300" | .667" | Ø0.584" | .300" | .117" | .242" | .375" | --- | 0.017" |
| SWSC1 | 1 | Concentric | M8 x1.25 | .215" | .761" | Ø.771" | .300" | .117" | .242" | .375" | --- | 0.025" |
| SWSC0X | 0 | Concentric | M6 x 1.0 | .300" | .667" | Ø0.584" | .300" | .117" | .242" | .375" | --- | 0.017" |
| SWSC1X | 1 | Concentric | M8 x1.25 | .215" | .761" | Ø.771" | .300" | .117" | .242" | .375" | --- | 0.025" |
| SWSC2X | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSC3X | 3 | Concentric | M12 x 1.75 | .595" | 1.444" | Ø1.803" | .595" | .224" | .537" | .750" | .315" | --- |
| SWSC4X | 4 | Concentric | M14 x 2.0 | .748" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSC0SSX | 0 | Concentric | M6 x 1.0 | .300" | .667" | Ø0.584" | .300" | .117" | .242" | .375" | --- | 0.017" |
| SWSC1SSX | 1 | Concentric | M8 x1.25 | .215" | .761" | Ø.771" | .300" | .117" | .242" | .375" | --- | 0.025" |
| SWSC2SSX | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSC3SSX | 3 | Concentric | M12 x 1.75 | .595" | 1.444" | Ø1.803" | .595" | .224" | 537" | .750" | .315" | --- |
| SWSC4SSX | 4 | Concentric | M14 x 2.0 | .748" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSC2SSH1 | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSC3SSH1 | 3 | Concentric | M12 x 1.75 | .595" | 1.444" | Ø2.360" | .595" | .224" | 537" | .750" | .315" | --- |
| SWSC0SS227 | 0 | Concentric | M6 x 1.0 | .300" | .667" | Ø0.584" | .300" | .117" | .242" | .375" | --- | 0.017" |
| SWSC1SS227 | 1 | Concentric | M8 x1.25 | .215" | .761" | Ø.771" | .300" | .117" | .242" | .375" | --- | 0.025" |
| SWSC2SS227 | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSC3SS227 | 3 | Concentric | M12 x 1.75 | .595" | 1.767" | Ø1.803" | .595" | .224" | 537" | .750" | .315" | --- |
| SWSC4SS227 | 4 | Concentric | M14 x 2.0 | .748" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSC0SS300 | 0 | Concentric | M6 x 1.0 | .300" | .667" | Ø0.584" | .300" | .117" | .242" | .375" | --- | 0.017" |
| SWSC1SS300 | 1 | Concentric | M8 x1.25 | .215" | .761" | Ø.771" | .300" | .117" | .242" | .375" | --- | 0.025" |
| SWSC2SS300 | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSC3SS300 | 3 | Concentric | M12 x 1.75 | .595" | 1.444" | Ø1.803" | .595" | .224" | 537" | .750" | .315" | --- |
| SWSC4SS300 | 4 | Concentric | M14 x 2.0 | .748" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSC1SSVAC | 1 | Concentric | M8 x1.25 | .215" | .761" | Ø.771" | .300" | .117" | .242" | .375" | --- | 0.025" |
| SWSC2SSVAC | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSCWD2SSX | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSCWD3SSX | 3 | Concentric | M12 x 1.75 | .595" | 1.444" | Ø1.803" | .595" | .224" | 537" | .750" | .315" | --- |
| Part # | Bearing Size | Adjustability | Eccentric Offset (A) | Eccentric Shoulder Dia. (B1) | Eccentric Shoulder Length (C) | Thread (D1) | Thread Length (E) | Overall Length (F) | Wheel Dia. (G) | Journal Length (H) | Hex Thickness (J2) | Vee Height (K) | Hex Size (L) | Opt. End Hex Size (M3) | Material Protrusion (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SWSE0 | 0 | Eccentric | 0.24" | Ø.219" | .085" | M5 x 0.8 | .215" | .667" | Ø0.584" | .300" | .117" | .117" | .375" | --- | 0.017" |
| SWSE1 | 1 | Eccentric | .024" | Ø.248" | .085" | M6 x 1.0 | .183" | .761" | Ø.771" | .319" | .132" | .287" | .4375" | --- | 0.025" |
| SWSE0X | 0 | Eccentric | 0.24" | Ø.219" | .085" | M5 x 0.8 | .215" | .667" | Ø0.584" | .300" | .117" | .117" | .375" | --- | 0.017" |
| SWSE1X | 1 | Eccentric | .024" | Ø.248" | .085" | M6 x 1.0 | .183" | .761" | Ø.771" | .319" | .132" | .287" | .4375" | --- | 0.025" |
| SWSE2X | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSE3X | 3 | Eccentric | .059" | Ø.422" | .170" | M10 x 1.5 | .425" | 1.444" | Ø1.803" | .595" | .224" | .537" | .750" | .315" | --- |
| SWSE4X | 4 | Eccentric | .079" | Ø.500" | .177" | M12 x 1.75 | .571" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSE0SSX | 0 | Eccentric | 0.24" | Ø.219" | .085" | M5 x 0.8 | .215" | .667" | Ø0.584" | .300" | .117" | .117" | .375" | --- | 0.017" |
| SWSE1SSX | 1 | Eccentric | .024" | Ø.248" | .085" | M6 x 1.0 | .183" | .761" | Ø.771" | .319" | .132" | .287" | .4375" | --- | 0.025" |
| SWSE2SSX | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSE3SSX | 3 | Eccentric | 059" | Ø.422" | .170" | M10 x 1.5 | .425" | 1.444" | Ø1.803" | .595" | .224" | .537" | .750" | .315" | --- |
| SWSE4SSX | 4 | Eccentric | 079" | Ø.500" | .177" | M12 x 1.75 | .571" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSE2SSH1 | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSE3SSH1 | 3 | Eccentric | 059" | Ø.422" | .170" | M10 x 1.5 | .425" | 1.444" | Ø1.803" | 595" | .224" | .537" | .750" | .315" | --- |
| SWSE0SS227 | 0 | Eccentric | 0.24" | Ø.219" | .085" | M5 x 0.8 | .215" | .667" | Ø0.584" | .300" | .117" | .117" | .375" | --- | 0.017" |
| SWSE1SS227 | 1 | Eccentric | .024" | Ø.248" | .085" | M6 x 1.0 | .183" | .761" | Ø.771" | .319" | .132" | .287" | .4375" | --- | 0.025" |
| SWSE2SS227 | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSE3SS227 | 3 | Eccentric | 059" | Ø.422" | .170" | M10 x 1.5 | .425" | 1.444" | Ø1.803" | .595" | .224" | .537" | .750" | .315" | --- |
| SWSE4SS227 | 4 | Eccentric | 079" | Ø.500" | .177" | M12 x 1.75 | .571" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSE0SS300 | 0 | Eccentric | 0.24" | Ø.219" | .085" | M5 x 0.8 | .215" | .667" | Ø0.584" | .300" | .117" | .117" | .375" | --- | 0.017" |
| SWSE1SS300 | 1 | Eccentric | .024" | Ø.248" | .085" | M6 x 1.0 | .183" | .761" | Ø.771" | .319" | .132" | .287" | .4375" | --- | 0.025" |
| SWSE2SS300 | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSE3SS300 | 3 | Eccentric | 059" | Ø.422" | .170" | M10 x 1.5 | .425" | 1.444" | Ø1.803" | .595" | .224" | .537" | .750" | .315" | --- |
| SWSE4SS300 | 4 | Eccentric | 079" | Ø.500" | .177" | M12 x 1.75 | .571" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSE1SSVAC | 1 | Eccentric | .024" | Ø.248" | .085" | M6 x 1.0 | .183" | .761" | Ø.771" | .319" | .132" | .287" | .4375" | --- | 0.025" |
| SWSE2SSVAC | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSEWD2SSX | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSEWD3SSX | 3 | Eccentric | 059" | Ø.422" | .170" | M10 x 1.5 | .425" | 1.444" | Ø1.803" | .595" | .224" | .537" | .750" | .315" | --- |
Concentric Studded Wheels With End Hex:
Eccentric Studded Wheels With End Hex:
| Part # | Bearing Size | Adjustability | Thread (D1) | Thread Length (E) | Overall Length (F) | Wheel Dia. (G) | Journal Length (H) | Hex Thickness (J2) | Vee Height (K) | Hex Size (L) | Opt. End Hex Size (M3) | Material Protrusion (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SWSC0HA | 0 | Concentric | M6 x 1.0 | .300" | .667" | Ø0.584" | .300" | .117" | .242" | .375" | --- | 0.017" |
| SWSC1HA | 1 | Concentric | M8 x1.25 | .215" | .761" | Ø.771" | .300" | .117" | .242" | .375" | --- | 0.025" |
| SWSC0XHA | 0 | Concentric | M6 x 1.0 | .300" | .667" | Ø0.584" | .300" | .117" | .242" | .375" | --- | 0.017" |
| SWSC1XHA | 1 | Concentric | M8 x1.25 | .215" | .761" | Ø.771" | .300" | .117" | .242" | .375" | --- | 0.025" |
| SWSC2XHA | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSC3XHA | 3 | Concentric | M12 x 1.75 | .595" | 1.444" | Ø1.803" | .595" | .224" | .537" | .750" | .315" | --- |
| SWSC4XHA | 4 | Concentric | M14 x 2.0 | .748" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSC0SSXHA | 0 | Concentric | M6 x 1.0 | .300" | .667" | Ø0.584" | .300" | .117" | .242" | .375" | --- | 0.017" |
| SWSC1SSXHA | 1 | Concentric | M8 x1.25 | .215" | .761" | Ø.771" | .300" | .117" | .242" | .375" | --- | 0.025" |
| SWSC2SSXHA | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSC3SSXHA | 3 | Concentric | M12 x 1.75 | .595" | 1.444" | Ø1.803" | .595" | .224" | 537" | .750" | .315" | --- |
| SWSC4SSXHA | 4 | Concentric | M14 x 2.0 | .748" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSC2SSH1HA | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSC3SSH1HA | 3 | Concentric | M12 x 1.75 | .595" | 1.444" | Ø2.360" | .595" | .224" | 537" | .750" | .315" | --- |
| SWSC0SS227HA | 0 | Concentric | M6 x 1.0 | .300" | .667" | Ø0.584" | .300" | .117" | .242" | .375" | --- | 0.017" |
| SWSC1SS227HA | 1 | Concentric | M8 x1.25 | .215" | .761" | Ø.771" | .300" | .117" | .242" | .375" | --- | 0.025" |
| SWSC2SS227HA | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSC3SS227HA | 3 | Concentric | M12 x 1.75 | .595" | 1.767" | Ø1.803" | .595" | .224" | 537" | .750" | .315" | --- |
| SWSC4SS227HA | 4 | Concentric | M14 x 2.0 | .748" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSC0SS300HA | 0 | Concentric | M6 x 1.0 | .300" | .667" | Ø0.584" | .300" | .117" | .242" | .375" | --- | 0.017" |
| SWSC1SS300HA | 1 | Concentric | M8 x1.25 | .215" | .761" | Ø.771" | .300" | .117" | .242" | .375" | --- | 0.025" |
| SWSC2SS300HA | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSC3SS300HA | 3 | Concentric | M12 x 1.75 | .595" | 1.444" | Ø1.803" | .595" | .224" | 537" | .750" | .315" | --- |
| SWSC4SS300HA | 4 | Concentric | M14 x 2.0 | .748" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSC1SSVACHA | 1 | Concentric | M8 x1.25 | .215" | .761" | Ø.771" | .300" | .117" | .242" | .375" | --- | 0.025" |
| SWSC2SSVACHA | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSCWD2SSXHA | 2 | Concentric | M10 x 1.5 | .448" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSCWD3SSXHA | 3 | Concentric | M12 x 1.75 | .595" | 1.444" | Ø1.803" | .595" | .224" | 537" | .750" | .315" | --- |
| Part # | Bearing Size | Adjustability | Eccentric Offset (A) | Eccentric Shoulder Dia. (B1) | Eccentric Shoulder Length (C) | Thread (D1) | Thread Length (E) | Overall Length (F) | Wheel Dia. (G) | Journal Length (H) | Hex Thickness (J2) | Vee Height (K) | Hex Size (L) | Opt. End Hex Size (M3) | Material Protrusion (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SWSE0HA | 0 | Eccentric | 0.24" | Ø.219" | .085" | M5 x 0.8 | .215" | .667" | Ø0.584" | .300" | .117" | .117" | .375" | --- | 0.017" |
| SWSE1HA | 1 | Eccentric | .024" | Ø.248" | .085" | M6 x 1.0 | .183" | .761" | Ø.771" | .319" | .132" | .287" | .4375" | --- | 0.025" |
| SWSE0XHA | 0 | Eccentric | 0.24" | Ø.219" | .085" | M5 x 0.8 | .215" | .667" | Ø0.584" | .300" | .117" | .117" | .375" | --- | 0.017" |
| SWSE1XHA | 1 | Eccentric | .024" | Ø.248" | .085" | M6 x 1.0 | .183" | .761" | Ø.771" | .319" | .132" | .287" | .4375" | --- | 0.025" |
| SWSE2XHA | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSE3XHA | 3 | Eccentric | .059" | Ø.422" | .170" | M10 x 1.5 | .425" | 1.444" | Ø1.803" | .595" | .224" | .537" | .750" | .315" | --- |
| SWSE4XHA | 4 | Eccentric | .079" | Ø.500" | .177" | M12 x 1.75 | .571" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSE0SSXHA | 0 | Eccentric | 0.24" | Ø.219" | .085" | M5 x 0.8 | .215" | .667" | Ø0.584" | .300" | .117" | .117" | .375" | --- | 0.017" |
| SWSE1SSXHA | 1 | Eccentric | .024" | Ø.248" | .085" | M6 x 1.0 | .183" | .761" | Ø.771" | .319" | .132" | .287" | .4375" | --- | 0.025" |
| SWSE2SSXHA | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSE3SSXHA | 3 | Eccentric | 059" | Ø.422" | .170" | M10 x 1.5 | .425" | 1.444" | Ø1.803" | .595" | .224" | .537" | .750" | .315" | --- |
| SWSE4SSXHA | 4 | Eccentric | 079" | Ø.500" | .177" | M12 x 1.75 | .571" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSE2SSH1HA | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSE3SSH1HA | 3 | Eccentric | 059" | Ø.422" | .170" | M10 x 1.5 | .425" | 1.444" | Ø1.803" | 595" | .224" | .537" | .750" | .315" | --- |
| SWSE0SS227HA | 0 | Eccentric | 0.24" | Ø.219" | .085" | M5 x 0.8 | .215" | .667" | Ø0.584" | .300" | .117" | .117" | .375" | --- | 0.017" |
| SWSE1SS227HA | 1 | Eccentric | .024" | Ø.248" | .085" | M6 x 1.0 | .183" | .761" | Ø.771" | .319" | .132" | .287" | .4375" | --- | 0.025" |
| SWSE2SS227HA | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSE3SS227HA | 3 | Eccentric | 059" | Ø.422" | .170" | M10 x 1.5 | .425" | 1.444" | Ø1.803" | .595" | .224" | .537" | .750" | .315" | --- |
| SWSE4SS227HA | 4 | Eccentric | 079" | Ø.500" | .177" | M12 x 1.75 | .571" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSE0SS300HA | 0 | Eccentric | 0.24" | Ø.219" | .085" | M5 x 0.8 | .215" | .667" | Ø0.584" | .300" | .117" | .117" | .375" | --- | 0.017" |
| SWSE1SS300HA | 1 | Eccentric | .024" | Ø.248" | .085" | M6 x 1.0 | .183" | .761" | Ø.771" | .319" | .132" | .287" | .4375" | --- | 0.025" |
| SWSE2SS300HA | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSE3SS300HA | 3 | Eccentric | 059" | Ø.422" | .170" | M10 x 1.5 | .425" | 1.444" | Ø1.803" | .595" | .224" | .537" | .750" | .315" | --- |
| SWSE4SS300HA | 4 | Eccentric | 079" | Ø.500" | .177" | M12 x 1.75 | .571" | 1.767" | Ø2.360" | .748" | .269" | .644" | .875" | .394" | --- |
| SWSE1SSVACHA | 1 | Eccentric | .024" | Ø.248" | .085" | M6 x 1.0 | .183" | .761" | Ø.771" | .319" | .132" | .287" | .4375" | --- | 0.025" |
| SWSE2SSVACHA | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSEWD2SSXHA | 2 | Eccentric | .038" | Ø.375" | .110" | M8 x 1.25 | .338" | 1.046" | Ø1.210" | .448" | .160" | .379" | .5625" | .236" | --- |
| SWSEWD3SSXHA | 3 | Eccentric | 059" | Ø.422" | .170" | M10 x 1.5 | .425" | 1.444" | Ø1.803" | .595" | .224" | .537" | .750" | .315" |
---
|
Bushings are made with a standard head thickness tolerance of +/-01001" and are constructed of high-quality 303-grade stainless steel.
Imperial Bushings:
Metric Bushings:
Imperial Bushings:
| Part # | Size | Head Profile | Adjustability | Eccentric Offset (A) | Head Size (B) | Overall Height (C) | Head Thickness (D1) | Mounting Surface To Wheel Vee (E) | Wheel Mounting Diameter (F) | Wheel Mounting Length (G) | Mounting Hole Dia. (H) | Recommended Mounting Hardware (Screws / Bolts) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| B1SS | 1 | Standard | Concentric | --- | Ø.440" | .550" | .250" | .405" | Ø.1871" | .300" | Ø.1406" | #6 |
| BX1SS | 1 | Standard | Eccentric | .012" | .438" | .550" | .250" | .405" | Ø.1871" | .300" | Ø.1406" | #6 |
| 1PWB | 1 | Low | Concentric | --- | Ø.440" | .380" | .080" | .235" | Ø.1871" | .300" | Ø.1570" | M4 |
| 1PWBX | 1 | Low | Eccentric | .007" | .438" | 380" | .080" | .235" | Ø.1871" | .300" | Ø.1570" | M4 |
| B2SS | 2 | Standard | Concentric | --- | Ø.560" | .706" | .281" | .500" | Ø.3746" | .425" | Ø.250" | 1/4" |
| BX2SS | 2 | Standard | Eccentric | .024" | .562" | .706" | .281" | .500" | Ø.3746" | .425" | Ø.250" | 1/4" |
| 2PWB | 2 | Low | Concentric | --- | Ø.560" | .525" | .100" | .319" | Ø.3746" | .425" | Ø.250" | 1/4" |
| 2PWBX | 2 | Low | Eccentric | .024" | .562" | .525" | .100" | .319" | Ø.3746" | .425" | Ø.250" | 1/4" |
| B3SS | 3 | Standard | Concentric | --- | Ø.750" | .990" | .375" | .688" | Ø.4720" | .615" | Ø.3125" | 5/16" |
| BX3SS | 3 | Standard | Eccentric | .042" | .750" | .990" | .375" | .688" | Ø.4720" | .615" | Ø.3125" | 5/16" |
| 3PWB | 3 | Low | Concentric | --- | Ø.750" | .740" | .125" | .438" | Ø.4720" | .615" | Ø.3125" | 5/16" |
| 3PWBX | 3 | Low | Eccentric | .042" | .750" | .740" | .125" | .438" | Ø.4720" | .615" | Ø.3125" | 5/16" |
| B4SS | 4 | Standard | Concentric | --- | Ø.880" | 1.177" | .437" | .812" | Ø.5902" | .740" | Ø.3750" | 3/8" |
| BX4SS | 4 | Standard | Eccentric | .060" | .875" | 1.177" | .437" | .812" | Ø.5902" | .740" | Ø.3750" | 3/8" |
| 4PWB | 4 | Low | Concentric | --- | Ø.880" | .865" | .125" | .500" | Ø.5902" | .740" | Ø.3750" | 3/8" |
| 4PWBX | 4 | Low | Eccentric | .060" | .875" | .865" | .125" | .500" | Ø.5902" | .740" | Ø.3750" | 3/8" |
| B4XLSS | 4XL | Standard | Concentric | --- | Ø1.250" | 1.555" | .565" | 1.065" | Ø.8657" | .990" | Ø.5625" | 9/16" |
| BX4XLSS | 4XL | Standard | Eccentric | .060" | 1.250" | 1.555" | .565" | 1.065"" | Ø.8657" | .990" | Ø.5625" | 9/16" |
| 4XLPWB | 4XL | Low | Concentric | --- | Ø1.250" | 1.178" | .188" | .688" | Ø.8657" | .990" | Ø.5625" | 9/16" |
| 4XLPWBX | 4XL | Low | Eccentric | .060" | 1.250" | 1.178" | .188" | .688" | Ø.8657" | .990" | Ø.5625" | 9/16" |
| Part # | Size | Head Profile | Adjustability | Eccentric Offset (A) | Head Size (B) | Overall Height (C) | Head Thickness (D1) | Mounting Surface To Wheel Vee (E) | Wheel Mounting Diameter (F) | Wheel Mounting Length (G) | Mounting Hole Dia. (H) | Recommended Mounting Hardware (Screws / Bolts) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MB1SS | 1 | Standard | Concentric | --- | Ø.440" | .545" | .245" | .400" | Ø.1871" | .300" | Ø.1570" | M4 |
| MBX1SS | 1 | Standard | Eccentric | .010" | .472" | .545" | .245" | .400" | Ø.1871" | .300" | Ø.1570" | M4 |
| M1PWB | 1 | Low | Concentric | --- | Ø.440" | .383" | .083" | .238" | Ø.1871" | .300" | Ø.1570" | M4 |
| M1PWBX | 1 | Low | Eccentric | .007" | .472" | .383" | .083" | .238" | Ø.1871" | .300" | Ø.1570" | M4 |
| MB2SS | 2 | Standard | Concentric | --- | Ø.560" | .687" | .262" | .48" | Ø.3746" | .425" | Ø.2362" | M6 |
| MBX2SS | 2 | Standard | Eccentric | .024" | .551" | .687" | .262" | .48" | Ø.3746" | .425" | Ø.2362" | M6 |
| M2PWB | 2 | Low | Concentric | --- | Ø.560" | .529" | .104" | .323" | Ø.3746" | .425" | Ø.2362" | M6 |
| M2PWBX | 2 | Low | Eccentric | .024" | .551" | .529" | .104" | .323" | Ø.3746" | .425" | Ø.2362" | M6 |
| MB3SS | 3 | Standard | Concentric | --- | Ø.750" | .988" | .373" | .686" | Ø.4720" | .615" | Ø.3150" | M8 |
| MBX3SS | 3 | Standard | Eccentric | .042" | .748" | .988" | .373" | .686" | Ø.4720" | .615" | Ø.3150" | M8 |
| M3PWB | 3 | Low | Concentric | --- | Ø.750" | .752" | .137" | .450" | Ø.4720" | .615" | Ø.3150" | M8 |
| M3PWBX | 3 | Low | Eccentric | .042" | .748" | .752" | .137" | .450" | Ø.4720" | .615" | Ø.3150" | M8 |
| MB4SS | 4 | Standard | Concentric | --- | Ø.880" | 1.177" | .437" | .812" | Ø.5902" | .740" | Ø.3937" | M10 |
| MBX4SS | 4 | Standard | Eccentric | .060" | .866" | 1.177" | .437" | .812" | Ø.5902" | .740" | Ø.3937" | M10 |
| M4PWB | 4 | Low | Concentric | --- | Ø.880" | .862" | .122" | .497" | Ø.5902" | .740" | Ø.3937" | M10 |
| M4PWBX | 4 | Low | Eccentric | .060" | .866" | .862" | .122" | .497" | Ø.5902" | .740" | Ø.3937" | M10 |
| MB4XLSS | 4XL | Standard | Concentric | --- | Ø1.250" | 1.555" | .565" | 1.065" | Ø.8657" | .990" | Ø.5512" | M14 |
| MBX4XLSS | 4XL | Standard | Eccentric | .060" | 1.18" | 1.555" | .565" | 1.065" | Ø.8657" | .990" | Ø.5512" | M14 |
| M4XLPWB | 4XL | Low | Concentric | --- | 1.181" | 1.191" | .201" | .701" | Ø.8657" | .990" | Ø.5512" | M14 |
| M4XLPWBX | 4XL | Low | Eccentric | .060" | 1.181" | 1.191" | .201" | .701" | Ø.8657" | .990" | Ø.5512" | M14 |
These Journals are made for the Original Type V-Guide Wheel Bearings and are made from anti-corrosive materials.
Journal Sizes:
Journal Sizes:
| Part # | Size | Adjustability | Eccentric Offset (A) | Overall Length (B) | Wheel Mounting Dia. (C) | Journal Mount Dia. (D1) | Journal Length (E) | Wheel Mount Thread (F) | Journal Mount Thread (G) | Hex Thickness (H) | Vee Height (J) | Hex Size (K) | Wrench Flats (L) | Min. Mounting Plate Thickness | Max. Mounting Plate Thickness |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MJC0A | 0 | Concentric | --- | 1.450" | Ø.1571" | Ø.250" | .695" | 8-32 | 1/4-28 | .250" | .375" | .375" | .125" | .125" | .375" |
| MJX0A | 0 | Eccentric | .010" | 1.450" | Ø.1571" | Ø.250" | .695" | 8-32 | 1/4-28 | .250" | .375" | .375" | .125" | .125" | .375" |
| MJC1A | 1 | Concentric | --- | 1.540" | Ø.1871" | Ø.250" | .785" | 10-32 | 1/4-28 | .250" | .405" | .438" | .125" | .125" | .375" |
| MJX1A | 1 | Eccentric | .012" | 1.540" | Ø.1871" | Ø.250" | .785" | 10-32 | 1/4-28 | .250" | .405" | .438" | .125" | .125" | .375" |
| MJC2A | 2 | Concentric | --- | 2.173" | Ø.3746" | Ø.375" | 1.109" | 5/16-24 | 3/8-24 | .281" | .500" | .563" | .250" | .187" | .500" |
| MJX2A | 2 | Eccentric | .024" | 2.173" | Ø.3746" | Ø.375" | 1.109" | 5/16-24 | 3/8-24 | .281" | .500" | .563" | .250" | .187" | .500" |
| MJC3A | 3 | Concentric | --- | 2.620" | Ø.4720" | Ø.437" | 1.375" | 7/16-20 | 7/16-20 | .375" | .688" | .750" | .250" | .250" | .625" |
| MJX3A | 3 | Eccentric | .042" | 2.620" | Ø.4720" | Ø.437" | 1.375" | 7/16-20 | 7/16-20 | .375" | .688" | .750" | .250" | .250" | .625" |
| MJC4A | 4 | Concentric | --- | 3.068" | Ø.5904" | Ø.500" | 1.565" | 1/2-20 | 1/2-20 | .437" | .812" | .875" | .312" | .375" | .750" |
| MJX4A | 4 | Eccentric | .060" | 3.068" | Ø.5904" | Ø.500" | 1.565" | 1/2-20 | 1/2-20 | .437" | .812" | .875" | .312" | .375" | .750" |
| MJC4XLA | 4XL | Concentric | --- | 4.070" | Ø.8657" | Ø.750" | 2.045" | 3/4-16 | 3/4-16 | .565" | .940" | 1.250" | .437" | .750" | 1.125" |
| MJX4XLA | 4XL | Eccentric | .060" | 4.070" | Ø.8657" | Ø.750" | 2.045" | 3/4-16 | 3/4-16 | .565" | .940" | 1.250" | .437" | .750" | 1.125" |
Tracks are designed and manufactured to precision tolerances to ensure a smooth operation with the bearing wheels.
Single-Edge Track Dimensions:
Standard Lengths and Holes:
Notes:
Single-Edge Track Dimensions:
| Part # | Size | Overall Width (A) | Overall Height (B) | Undercut Depth (C) | Undercut To Vee (D) | Shoulder To Vee Apex (E) | Hole Diameter (E) | Shoulder To Hole (G) | Hole Spacing (H) | Hole end Spacing 1 (J) | Hole End Spacing 2 (K) | Overall Length (L) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T1 | 1 | .437" | .187" | .062" | .031" | .125" | Ø.156" | .156" | 2.000" | .250" | .250" | Standard Versions or User Specified |
| T2 | 2 | .625" | .250" | .094" | .031" | .187" | Ø.203" | .219" | 3.000" | .315" | .315" | Standard Versions or User Specified |
| T3 | 3 | .875" | .343" | .109" | .062" | .250" | Ø.281" | .313" | 3.000" | .375" | .375" | Standard Versions or User Specified |
| T4 | 4 | 1.062" | .437" | .125" | .093" | .312" | Ø.344" | .375" | 4.000" | .500" | .500" | Standard Versions or User Specified |
| Size | Length | # Of Holes | Size | Length | # Of Holes | Size | Length | # Of Holes | Size | Length | # Of Holes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 12.50" | 7 | 2 | 12.63" | 5 | 3 | 12.75" | 5 | 4 | 13.00" | 4 |
| 1 | 24.50" | 13 | 2 | 24.63" | 9 | 3 | 24.75" | 9 | 4 | 25.00" | 7 |
| 1 | 36.50" | 19 | 2 | 36.63" | 13 | 3 | 36.75" | 13 | 4 | 37.00" | 10 |
| 1 | 48.50" | 25 | 2 | 48.63" | 17 | 3 | 48.75" | 17 | 4 | 49.00" | 13 |
| 1 | 60.50" | 31 | 2 | 60.63" | 21 | 3 | 60.75" | 21 | 4 | 61.00" | 16 |
| 1 | 72.50" | 37 | 2 | 72.63" | 25 | 3 | 72.75" | 25 | 4 | 73.00" | 19 |
- Tolerance for the shoulder to Hole (G) is +/- 0.005"
- Tolerance for hole spacing (H) are non-cumulative and +/- 0.005"
- Tolerance for hole end spacing 1 and 2 (j and K) is +/- 0.005"
- Tolerance for overall length (L) is +/- 0.015" with holes and +/- 0.063" when cut to length without holes.
- Carbon steel track material is AISI 1045, available soft at HRc 22-25, or induction hardened 0.01" deep to HRc 53 minimum.
- Stainless steel track material is AISI 420, available soft at HRc 20-22, or induction hardened 0.01" deep to HRc 40 minimum, contact us to discuss material options.
- Track finish is polished and oiled for corrosion resistance.
- Maximum single piece track lengths are 20 feet hardened, or 22 feet soft.
Wheel covers are manufactured from black ABS and utilize white wool felt for the lubricator. These covers are supplied with stainless steel mounting hardware and are best used with lightweight synthetic oil.
SWA wheel Covers:
SWS/ SWI Series Studded Wheels & Bushings:
SWA wheel Covers:
| Part # | Size | Mounting Compatibility | Overall Height (A) | Overall Length (B) | Overall Width (C) | Slot Span (D) | Base Thickness (E) | Mounting Surface To Track Vee (F) | Screw Type | Washer Type |
|---|---|---|---|---|---|---|---|---|---|---|
| WC2A | 2 | Standard Profile Bushings | .950" | 2.000" | 1.350" | 1.680" | .397" | .480" | M3 x 0.5 x 16 mm | M3 |
| WC2LPA | 2 |
Low Profile Bushings
SWA Series |
.792" | 2.000" | 1.350" | 1.680" | .239" | .322" | M3 x 0.5 x 12 mm | M3 |
| WC3A | 3 | Standard Profile Bushings | 1.340" | 2.670" | 1.975" | 2.340" | .604" | .690" | M3 x 0.5 x 20 mm | M3 |
| WC3LPA | 3 |
Low Profile Bushings
SWA Series |
1.104" | 2.670" | 1.975" | 2.340" | .368" | .454" | M3 x 0.5 x 19 mm | M3 |
| WC4A | 4 | Standard Profile Bushings | 1.580" | 3.500" | 2.500" | 3.070" | .760" | .813" | M4 x 0.7 x 25 mm | M4 |
| WC4LPA | 4 |
Low Profile Bushings
SWA Series |
1.265" | 3.500" | 2.500" | 3.070" | .445" | .498" | M4 x 0.7 x 20 mm | M4 |
| Part # | Size | Mounting Compatibility | Overall Height (A) | Overall Length (B) | Overall Width (C) | Slot Span (D) | Base Thickness (E) | Mounting Surface To Track Vee (F) | Screw Type |
|---|---|---|---|---|---|---|---|---|---|
| WC1SWIA | 1 | SWS/SWI Series | .525" | 1.496" | .960" | 1.250" | .055" | .287" | M3 x 0.5 x 10 mm |
| WC2SWIA | 2 | SWS/SWI Series | .665" | 1.960" | 1.345" | 1.680" | .055" | .379" | M3 x 0.5 x 10 mm |
| WC3SWIA | 3 | SWS/SWI Series | .915" | 2.650" | 1.970" | 2.340" | .055" | .536" | M3 x 0.5 x 10 mm |
| WC4SWIA | 4 | SWS/SWI Series | 1.155" | 3.460" | 2.550" | 3.070" | .055" | .644" | M4 x 0.7 x 12 mm |
Track Lubricators utilize a premium white wool felt for dispursing light-weight synthetic oil onto the track, the felt holder is made from high-quality AISI 300 stainless steel as well as the mounting hardware.
Track Lubricator Sizes:
Track Lubricator Sizes:
| Part # | Size | Mounting Compatibility | Overall Height (A) | Overall Length (B) | Overall Width (C) | Holder Length (D) | Slot Dia. (E) | Slot Span (F) | Slot Center (G) | Min. Mounting Surface To Track Vee | Max. Mounting Surface To Track Vee | Screw Size | Washer Size |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TL0A | 0 | Studded Wheels | .360" | .670" | .300" | .230" | Ø.094 | .472" | .115" | .205" | .242" | M2 x 0.4 x 4 mm | M2 |
| TL1A | 1 | Bushings Standard Journals | .690" | 1.102" | .450" | .472" | Ø.120 | .787" | .180" | .370" | .500" | M2 x 0.4 x 5 mm | M2 |
| TL2A | 2 | Bushings Standard Journals | .690" | 1.102" | .450" | .472" | Ø.120 | .787" | .180" | .370" | .500" | M2 x 0.4 x 5 mm | M2 |
| TL1LPA | 1 | Bushings Low SWA Series | .533" | 1.102" | .450" | .472" | Ø.120 | .787" | .180" | .213" | .343" | M3 x 0.5 x 6 mm | M3 |
| TL2LPA | 2 | Bushings Low SWA Series | .533" | 1.102" | .450" | .472" | Ø.120 | .787" | .180" | .213" | .343" | M3 x 0.5 x 6 mm | M3 |
| TL1BWPA | 1 | SWS Series | .580" | 1.126" | .450" | .472" | Ø.120 | .799" | .180" | .270" | .390" | M3 x 0.5 x 6 mm | M3 |
| TL2BWPA | 2 | SWS Series | .580" | 1.126" | .450" | .472" | Ø.120 | .799" | .180" | .270" | .390" | M3 x 0.5 x 6 mm | M3 |
| TL3A | 3 | Bushings Standard Journals | 1.200" | 1.839" | .740" | .839" | Ø.170 | 1.339" | .290" | .638" | .867" | M3 x 0.5 x 6 mm | M3 |
| TL4A | 3 | Bushings Standard Journals | 1.200" | 1.839" | .740" | .839" | Ø.170 | 1.339" | .290" | .638" | .867" | M3 x 0.5 x 6 mm | M3 |
| TL3LPA | 3 | Bushings Low SWA Series | .840" | 1.839" | .740" | .839" | Ø.170 | 1.339" | .290" | .450" | .520" | M4 x 0.7 x 8 mm | M3 |
| TL4LPA | 4 | Bushings Low SWA Series | .840" | 1.839" | .740" | .839" | Ø.170 | 1.339" | .290" | .450" | .520" | M4 x 0.7 x 8 mm | M3 |
| TL3BWPA | 3 | SWS Series | 1.014" | 1.839" | .740" | .839" | Ø.170 | 1.339" | .290" | .513" | .681" | M4 x 0.7 x 8 mm | M3 |
| TL4BWPA | 4 | SWS Series | 1.014" | 1.839" | .740" | .839" | Ø.170 | 1.339" | .290" | .513" | .681" | M4 x 0.7 x 8 mm | M3 |
Minvee Linear Slide System
The Minvee linear slide systems made from Bishop-Wisecarver are miniature guides that consist of 1.75" wide by 2" long wheel plates that utilize AISI 52100 carbon steel or polymer wheels and double vee-edge guide tracks. It's important to note that when used with available 6063-T6 aluminium track support extrusion, assembled height is 0.788". MinVee double-edge track is also available in AISI 1045 carbon steel in six standard lengths up to 36.5" with mounting holes predrilled. Axial working capacities are 121.4 lbf for steel wheels and 15 lbf for polymer wheel versions. The Minvee systems can be found in many applications such as; semiconductor, laboratory, and medical applications with compact space requirements.
MinVee Wheel Plates
Wheel plates consist of two concentric and two eccentric DualVee studded wheels with an anodized aluminium wheel plate that has a stainless steel lubricator housing and felt lubricator pads. The below chart shows the standard configuration options, but custom configurations are available upon request.
| Part # | Weel Version | Temp. Range | Max. Speed | Max. Acceleration | Pitch Movement (MP) | YAW Movement (MY) | Roll Movement (MR) | Working Axial Load Capacity (LA) | Working Radial Load Capacity (LR) | Weight (Grams) |
|---|---|---|---|---|---|---|---|---|---|---|
| MV0WPAP | Polymer Overmolded AISI 440C Stainless Steel, Shielded | -4°F to 248°F | 1m/s | 3 g | 1.4 Nm | 4.5 Nm | 1 Nm | 66.7 N | 65 N | 72 |
| MV0WPA | AISI 52100 Carbon Steel, Shielded | -31°F to 248°F | 5m/s | 5g | 7.9 Nm | 8.6 Nm | 6.2 Nm | 540 N | 490 N | 84 |
| MV0WPAX | AISI 52100 Carbon Steel, Sealed | -22°F to 212°F | 5m/s | 5g | 7.9 Nm | 8.6 Nm | 6.2 Nm | 540 N | 490 N | 84 |
| MV0WPA-ss227 | AISI 440C Stainless Steel, High Temperature, Shielded | -22°F to 500°F | 5m/s | 5g | 6.5 Nm | 7.1 Nm | 5.1 Nm | 444 N | 408 N | 84 |
These tracks are precision manufactured to accommodate the miniature nature of these linear systems.
- Tolerance for Shoulder to Hole (G) is +/-.005"
- Tolerance for Hole Spacing (H) are non-cumulative and is +/-.005"
- Tolerance for Hole End Spacing 1 & 2 (J & K) are: +/-.005"
- Tolerances for Overall Length (L) are +/-.015 [+/-.38] with holes, and +/-.063 [+/-1.60] when cut to length without holes.
- Track material is AISI 1045 carbon steel, available soft at HRc 22-25, or induction hardened 0.01” deep to HRc 53 minimum.
- Track finish is polished and oiled for corrosion resistance.
- Maximum single piece track lengths are 20 feet hardened, or 22 feet soft.
| Size | Overall Width (A) | Overall Height (B) | Undercut Depth (C) | Undercut To Vee (D) | Shoulder To Vee Apex (E) | Hole Diameter (F) | Shoulder To Hole (G) | Hole spacing (H) | Hole End Spacing 1 (J) | Hole End Spacing 2 (K) | Overall Length (L) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | .516" | .153" | .033" | .060" | .158" | Ø.156" | .138" | 2.000" | .250" | .250" |
Standard Versions
or User Specified |
| Size | Length | # Of Holes | Size | Length | # Of Holes | Size | Length | # Of Holes |
|---|---|---|---|---|---|---|---|---|
| 0 | 6.50" | 4 | 0 | 18.50" | 10 | 0 | 30.50" | 16 |
| 0 | 12.50" | 7 | 0 | 24.50" | 13 | 0 | 36.50" | 19 |
- Tolerance for Shoulder to Hole (G) is +/-.005"
- Tolerance for Hole Spacing (H) are non-cumulative and is +/-.005"
- Tolerance for Hole End Spacing 1 & 2 (J & K) are: +/-.005"
- Tolerances for Overall Length (L) is +/-.063"
- Track support material is 6063-T6 aluminium with an anodized finish.
- Track support holes and cut to length ends are unfinished bare aluminium.
- The maximum single piece track length is 10 feet.
| Size | Overall Width (A) | Overall Height (B) | Surface To Edge (C) | Surface Width (D) | Vee Height (E) | Hole Diameter (F) | Shoulder To Hole (G) | Hole spacing (H) | Hole End Spacing 1 (J) | Hole End Spacing 2 (K) | Overall Length (L) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | .551" | .176" | .141" | .274" | .236" | Ø.172" | .273" | 2.000" | .250" | .250" |
Standard Versions
or User Specified |
| Size | Length | # Of Holes | Size | Length | # Of Holes | Size | Length | # Of Holes |
|---|---|---|---|---|---|---|---|---|
| 0 | 6.50" | 4 | 0 | 18.50" | 10 | 0 | 30.50" | 16 |
| 0 | 12.50" | 7 | 0 | 24.50" | 13 | 0 | 36.50" | 19 |