Home > Power Transmission > Electric Motors > Electric Motor Accessories >

Reversing 0-180 Volt DC Variable Speed Control (1/4 HP - 2 HP) - 240V Input

DC Variable Speed Control

Note: Premium Quality Electric Motor
Note: IP54 Enclosure Degree of Protection
Note: Fractional Horsepower Motor

Product Code: WDCCONTREV-180

Get a Quote
Call to Order 407-347-3519

Description

Technical Specs

This reversing (forward/ off/ reverse) 0-180 volt control unit has an alternating current (AC) input of 240 volts, and a direct current (DC) output of 0-180 volts. Utilizing a variable speed DC control makes your application dual voltage and makes it to where you can adjust the horsepower settings and can make DC electric motors work with AC applications. Specifically the horsepower range for this control unit is 1/4 HP - 2.0 HP.

Variable Speed DC Control Features

Dual Voltage - 120/240VAC, 50/60 HZ
Adjustable Horsepower Settings
Barrier Terminal Strip
Packaged Bridge Supply (full-wave)
1% Speed Regulation With Armature Voltage Feedback +/- 0.5% With Tach Feedback
Adjustable Minimum Speed (0-30% of max)
Adjustable Maximum Speed (66-110% of base)
Adjustable IR Compensation
Adjustable Linear Acceleration (0.5 - 8 seconds)
Adjustable Current Limit to 15 Amps
Line Voltage Compensation
5k OHM Speed Potentiometer With Leads, Knob and Dial Included
Power On/ Off Switch
50:1 Speed Range
Overload Capacity: 150% For One Minute
Transient Voltage Protection
Voltage Following Mode or DC Tachometer Followed By Supplying Underground Analog Input Signal (0-12 VDC)
DC Tachometer - Permits Start and Stop Without Breaking AC Lines
Remote Start/ Stop via Pot Circuit or Inhibit Circuit
Shunt Field Supply Provided (1 amp max; 100V for 120 VAC; 200V for 240 VAC input)
AC Line Fuse
Rated NEMA 4/12 With Threaded Conduit Holes

Compliancies/ Certs:

ISO9001 Certified
c(UL)US
ROHS Compliant