Tite-Seal Cover For 9" Conveyor X 10ft | 14 Ga. Steel

Tite-Seal cover for 9" conveyor X 10ft long is made from 14-gauge steel and is designed for use with angle troughs, Tite-Seal covers provide a certain degree of dut protection. The flat cover is held in place securely by a continuous formed steel U edging along both sides of the trough. This U edging is fitted with sponge rubber and seals the cover of the trough. The Tite-Seal quick-release cover clamps securely hold the cover in place and prevent accidental access to the screw conveyor, while providing easy access to the trough interior when needed. A gasket attached to the underside of the cover clamp seals the joint between lengths of the conveyor. For additional information or to get a quote on Tite-Seal cover for 9" conveyor X 10ft long contact our customer support team and we will be happy to assist you.

Tite-Seal cover for 9" conveyor X 10ft long Dimensions

• Part #:312-2231
• Conveyor Size: 9"
• Gauge of Steel: 14
• Dimension (A): 13-1/4"
• Dimension (B): 1-1/2"
• Weight Per Foot: 3.4 LBS

• • Part #:312-2231
  • Conveyor Size: 9"
  • Gauge of Steel: 14
  • Dimension (A): 13-1/4"
  • Dimension (B): 1-1/2"
  • Weight Per Foot: 3.4 LBS