Home > Chain MRO Parts > Roller Chain Tensioners > Rosta Tensioner Devices >

Rosta 06580004 R38 Tensioning Roller For SE38 Tensioner
Rosta 06580004 R38 Tensioning Roller
Rosta 06580004 R38 Tensioning Roller
  


Product Code: 06580004-R38-ROLLER
Get a Quote
Call to Order 407-347-3519

Description Technical Specs
 
Rosta 06580004 R38 Tensioning Roller For SE38 Tensioner is a permanently lubricated roller that utilizes premium 2Z C3 shielded bearings. It has a broad operating temperature range of -31° to + 212° degrees Fahrenheit.

R38 Tensioning Roller Dimensions


  • Type: R38
  • Article Number: 06580004
  • Max Speed: 5000 RPM
  • Maximum Belt Width: 3.35"
  • Dimension (A): 3.35"
  • Dimension (B): 3.15"
  • Dimension (C): 0.31"
  • Dimension (D): 0.98"
  • Dimension (E): 0.39"
  • Dimension (F): M20
  • Torque Hex Nut: 121.7 (lb/ ft)
  • Works With Tensioner Type: SE-38
  • Weight: 2.54 LBS

Tensioning With Flat Roller on Belt Back


– The diameter of the flat tensioning roller should at least measure 2⁄3 of the diameter of the smallest pulley in the drive.
– The width of the tensioning roller should be at least 20% wider than the overall width of the belt set.
– Installation on the belt back in the slack span, make sure that the belts are maintaining sufficient contact-arc on the driver and driven pulley.
About Us
Features
    • High-Quality Roller
    • Made In Accordance With ANSI and ISO Standards
    • High-Strength Construction

Accessories
Rosta SE38W Tensioner | Heat Resistant SE-38W Tensioner Rosta SE38G Tensioner | Oil Resistant SE-38G Tensioner Rosta SEF38 Tensioner | Front Mounting SEF-38 Tensioner 61030006 Rosta SE38 Tensioner Without Idler Hardware
Heat Resistant Rosta SE38W Tensioner Oil Resistant Rosta SE38G Tensioner Rosta SEF38 Front Mounting Tensioner 61030006 Rosta SE38 Tensioner
Rosta SEFE38 Tensioner | Front Mounting SEFE-38 Tensioner
Rosta SEFE38 Front Mounting Tensioner

Share your knowledge of this product. Be the first to write a review »