Home > Roller Chain > Roller Chain by Size > #35 Roller Chain >

35 Roller Chain | ANSI 35 Chain 10ft Box

Economy Plus #35 Roller Chain

Product Code: ECO-35RC-10FT

Description

Technical Specs

#35 roller chain is the 2nd size in the ANSI B29.1 roller chain sizes lineup. It utilizes a small form-factor for tight applications and is manufactured out of high-strength mild carbon steel for shock load and fatigue resistance. The Economy Plus series 35 chain was engineered for general light to even medium-duty industrial or agricultural applications, it is made using heat-treated components, factory pre-loaded to minimize initial stretch as well as operation stretch over time, and is part pre-lubed then factory dipped in a good-quality lubricant. Something important to note about 35 chain specifically is that it is a roller-less bushed chain, meaning that the chain has no roller but utilizes bushings instead much like ANSI 25 chain. Our Economy Plus #35 roller chain is supplied in 10ft coils including a connecting link with each, we also stock 100ft reels, 250ft reels, and 500ft reels of this chain for applications requiring longer lengths. After you select and purchase your chain make sure to use proper roller chain lubrication as well as proper roller chain tension, these practices not only improve chain performance but greatly increases longevity which reduces the need for downtime.

35 Roller Chain Dimensions

Single Strand Roller Chain Drawing (Side View)

Single Strand Roller Chain Drawing (Top View)

Pitch (P): 0.375"
Roller Width (W): 0.188"
Roller Diameter (D): 0.200"
Overall Width (A): 0.456"
Plate Height (H): 0.356"
Plate Thickness (T): 0.050"
Pin Diameter (E): 0.141"
Average Ultimate Strength: 2,100 LBS
Weight: 0.22 LBS/ FT

- Download The #35 Roller Chain Spec Sheet

Bulk #35 Roller Chain

Please note that we also supply cut-to-length custom strands of 35 chain as well.

100ft Reel	250ft Reel	500ft Reel
100ft Reel	250ft Reel	500ft Reel

In our ANSI 35 chain class, we offer a range of options as far as quality levels, packaging, and even material options. We also supply various attachments and even problem solver series #35 roller chain. To find out more view our complete section of 35 chains here!
35 Chain Sprockets
The below charts show our standard #35 roller chain sprockets, we also supply custom bore and configurations upon request.
A-Plate 35 Sprockets

Size	Tooth Count	Outside Diameter (OD)	Stock Bore	Weight (LBS)
Size	Tooth Count	Outside Diameter (OD)	Stock Bore	Weight (LBS)
*35A15*	15	1.990"	1/2"	0.10
*35A16*	16	2.110"	1/2"	0.12
*35A17*	17	2.230"	1/2"	0.12
*38A18*	18	2.350"	1/2"	0.14
*35A19*	19	2.470"	1/2"	0.16
*35A20*	20	2.590"	1/2"	0.20
*35A21*	21	2.710"	1/2"	0.20
*35A22*	22	2.830"	1/2"	0.22
*35A23*	23	2.950"	1/2"	0.24
*35A24*	24	3.070"	1/2"	0.26
*35A25*	25	3.190"	1/2"	0.28
*35A26*	26	3.310"	1/2"	0.28
*35A27*	27	3.430"	1/2"	0.34
*35A28*	28	3.550"	1/2"	0.34
*35A30*	30	3.790"	1/2"	0.46
*35A32*	32	4.030"	5/8"	0.46
*35A35*	35	4.390"	5/8"	0.60
*35A36*	36	4.510"	5/8"	0.62
*35A40*	40	4.990"	19/32"	0.70
*35A42*	42	5.230"	19/32"	0.78
*35A45*	45	5.590"	19/32"	0.88
*35A48*	48	5.950"	19/32"	1.21
*35A54*	54	6.660"	19/32"	1.32
*35A60*	60	7.380"	23/32"	1.66
*35A70*	70	8.580"	23/32"	2.30
*35A72*	72	8.810"	23/32"	2.56
*35A80*	80	9.770"	23/32"	3.16
*35A84*	84	10.250"	23/32"	3.26
*35A96*	96	11.680"	23/32"	4.64
*35A112*	112	13.590"	23/32"	5.05

B-Hub 35 Sprockets

Size	Tooth Count	Outside Diameter (OD)	Stock Bore	Maximum Reccomended Bore	Hub Diameter	Length Thru Bore	Weight (LBS)
Size	Tooth Count	Outside Diameter (OD)	Stock Bore	Maximum Reccomended Bore	Hub Diameter	Length Thru Bore	Weight (LBS)
35B8	8	1.130"	3/8"	3/8"	3/4"	3/4"	0.07
*35B9*	9	1.260"	3/8"	3/8"	27/32"	3/4"	0.09
*35B10*	10	1.380"	3/8"	9/16"	31/32"	3/4"	0.14
*35B11*	11	1.500"	3/8"	9/16"	1-1/16"	3/4"	0.17
*35B12*	12	1.630"	1/2"	9/16"	1-7/32"	3/4"	0.20
*35B13*	13	1.750"	1/2"	11/16"	1-1/4"	3/4"	0.23
*35B14*	14	1.870"	1/2"	7/8"	1-1/4"	3/4"	0.25
*35B15*	15	1.990"	1/2"	7/8"	1-11/32"	3/4"	0.29
*35B16*	16	2.110"	1/2"	15/16"	1-15/32"	3/4"	0.35
*35B17*	17	2.230"	1/2"	1-1/16"	1-19/32"	3/4"	0.42
*35B18*	18	2.350"	1/2"	1-3/16"	1-23/32"	3/4"	0.48
*35B19*	19	2.470"	1/2"	1-1/4"	1-27/32"	3/4"	0.54
*35B20*	20	2.590"	1/2"	1-5/16"	1-15/16"	3/4"	0.59
*35B21*	21	2.710"	1/2"	1-3/8"	2"	7/8"	0.80
*35B22*	22	2.830"	1/2"	1-3/8"	2"	7/8"	0.80
*35B23*	23	2.950"	1/2"	1-3/8"	2"	7/8"	0.82
*35B24*	24	3.070"	1/2"	1-3/8"	2"	7/8"	0.88
*35B25*	25	3.190"	1/2"	1-3/8"	2"	7/8"	0.88
*35B26*	26	3.310"	1/2"	1-3/8"	2"	7/8"	0.90
*35B27*	27	3.430"	1/2"	1-3/8"	2"	7/8"	0.94
*35B28*	28	3.550"	1/2"	1-3/8"	2"	7/8"	0.94
*35B30*	30	3.790"	1/2"	1-3/8"	2"	7/8"	1.02
*35B32*	32	4.030"	1/2"	1-3/8"	2"	7/8"	1.24
*35B35*	35	4.390"	5/8"	1-1/2"	2-1/4"	7/8"	1.50
*35B36*	36	4.510"	5/8"	1-1/2"	2-1/4"	7/8"	1.56
*35B40*	40	4.990"	5/8"	1-1/2"	2-1/4"	1"	1.62
*35B42*	42	5.230"	5/8"	1-1/2"	2-1/4"	1"	1.68
*35B45*	45	5.590"	5/8"	1-1/2"	2-1/4"	1"	1.78
*35B48*	48	5.950"	5/8"	1-1/2"	2-1/4"	1"	1.88
*35B54*	54	6.660"	5/8"	1-1/2"	2-1/4"	1"	2.20
*35B60*	60	7.380"	3/4"	1-1/2"	2-1/4"	1"	2.48
*35B70*	70	8.580"	3/4"	1-1/2"	2-1/4"	1"	3.12
*35B72*	72	8.810"	3/4"	1-1/2"	2-1/4"	1"	3.42
*35B80*	80	9.770"	3/4"	1-1/2"	2-1/4"	1"	3.82
*35B84*	84	10.250"	3/4"	1-1/2"	2-1/4"	1"	4.24
*35B96*	96	11.680"	3/4"	1-1/2"	2-1/4"	1"	5.16
35B112	112	13.590"	3/4"	1-1/2"	2-1/4"	1"	6.70

Taper Bushed 35 Sprockets

Size	Tooth Count	Bushing Used	Outside Diameter (OD)	Pitch Diameter (PD)	Dimension (L)	Dimension (C)	Weight (LBS)
Size	Tooth Count	Bushing Used	Outside Diameter (OD)	Pitch Diameter (PD)	Dimension (L)	Dimension (C)	Weight (LBS)
*35BTB18*	18	1008	2.352"	2.159"	7/8"	1-7/8"	0.4
*35BTB19*	19	1008	2.472"	2.278"	7/8"	1-13/16"	0.5
*35BTB20*	20	1008	2.593"	2.397"	7/8"	1-15/16"	0.6
*35BTB21*	21	1008	2.713"	2.516"	7/8"	2-1/16"	0.7
*35BTB22*	22	1210	2.883"	2.635"	1"	2-3/8"	0.8
*35BTB23*	23	1210	2.954"	2.754"	1"	2-7/16"	0.9
*35BTB24*	24	1210	3.074"	2.873"	1"	2-7/16"	0.9
*35BTB25*	25	1210	3.194"	2.992"	1"	2-7/16"	1.2
*35BTB26*	26	1610	3.314"	3.111"	1"	2-7/8"	1.1
*35BTB28*	28	1610	3.553"	3.349"	1"	2-7/8"	1.2
*35BTB30*	30	1610	3.793"	3.588"	1"	3-1/8"	1.2
*35BTB32*	32	1610	4.032"	3.826"	1"	3-1/4"	1.3
*35BTB35*	35	1610	4.392"	4.183"	1"	3-1/4"	1.4
*35BTB36*	36	1610	4.511"	4.303"	1"	3-1/4"	1.4
*35BTB40*	40	1610	4.990"	4.786"	1"	3-1/4"	1.9
*35BTB42*	42	1610	5.229"	5.018"	1"	3-1/4"	2.0
*35BTB45*	45	1610	5.588"	5.376"	1"	3-1/4"	2.1
*35BTB48*	48	1610	5.946"	5.734"	1"	3-1/4"	2.3
*35BTB54*	54	1610	6.663"	6.449"	1"	3-1/4"	2.6
*35BTB60*	60	1610	7.380"	7.165"	1"	3-1/4"	3.0
*35BTB70*	70	1610	8.575"	8.358"	1"	3-1/4"	3.7
*35BTB72*	72	1610	8.814"	8.597"	1"	3-1/4"	3.9
*35BTB80*	80	1610	9.770"	9.552"	1"	3-1/4"	4.5
*35BTB84*	84	1610	10.247"	10.029"	1"	3-1/4"	4.9
*35BTB96*	96	1610	11.680"	11.461"	1"	3-1/4"	6.0
*35BTB112*	112	1610	13.590"	13.371"	1"	3-1/4"	7.8

QD-Bushed 35 Sprockets

Size	Tooth Count	Bushing Used	Outside Diameter	Pitch Diameter	(L1)	(L2)	(C)	(Y)	(G)	(X)	(T)	Weight (LBS)
Size	Tooth Count	Bushing Used	Outside Diameter	Pitch Diameter	(L1)	(L2)	(C)	(Y)	(G)	(X)	(T)	Weight (LBS)
*35JA19*	19	JA	2.470"	2.278"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	0.28
*35JA20*	20	JA	2.590"	2.397"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	0.32
*35JA21*	21	JA	2.710"	2.516"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	0.34
*35JA22*	22	JA	2.830"	2.635"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	0.36
*35JA23*	23	JA	2.950"	2.754"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	0.38
*35JA24*	24	JA	3.070"	3.873"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	0.40
*35JA25*	25	JA	3.190"	2.992"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	0.44
*35JA26*	26	JA	3.310"	3.111"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	0.46
*35JA27*	27	JA	3.430"	3.230"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	0.48
*35JA28*	28	JA	3.550"	3.349"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	0.52
*35JA30*	30	JA	3.790"	3.588"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	0.56
*35JA32*	32	JA	4.030"	3.826"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	0.78
*35JA35*	35	JA	4.390"	4.183"	1-1/8"	1-1/8"	2-1/16"	53/64"	29/64"	5/8"	0.168"	1.04
*35SH36*	36	SH	4.510"	4.303"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	1.06
*35SH40*	40	SH	4.990"	4.780"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	1.18
*35SH42*	42	SH	5.230"	5.018"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	1.26
*35SH45*	45	SH	5.590"	5.376"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	1.40
*35SH48*	48	SH	5.950"	5.734"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	1.58
*35SH54*	54	SH	6.660"	6.449"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	1.88
*35SH60*	60	SH	7.380"	7.165"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	2.28
*35SH70*	70	SH	8.580"	8.358"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	2.94
*35SH72*	72	SH	8.810"	8.597"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	3.14
*35SH80*	80	SH	9.770"	9.552"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	3.68
*35SH84*	84	SH	10.250"	10.029"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	3.96
*35SH96*	96	SH	11.680"	11.461"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	5.38
*35SH112*	112	SH	13.590"	13.371"	1-7/16"	1-7/16"	2-11/16"	1-5/64"	41/64"	13/16"	0.168"	6.60

H-Bushed 35 Sprockets

Size	Tooth Count	Bushing Used	Outside Diameter (OD)	Pitch Diameter	(OL)	(L)	(C)	(H)	(P)	(T)	Weight (LBS)
Size	Tooth Count	Bushing Used	Outside Diameter (OD)	Pitch Diameter	(OL)	(L)	(C)	(H)	(P)	(T)	Weight (LBS)
*35H19*	19	H	2.470"	2.278"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	0.5
*35H20*	20	H	2.590"	2.397"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	0.5
*35H21*	21	H	2.710"	2.516"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	0.6
*35H22*	22	H	2.830"	2.635"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	0.7
*35H23*	23	H	2.950"	2.754"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	0.7
*35H24*	24	H	3.070"	2.873"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	0.8
*35H25*	25	H	3.190"	2.992"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	0.8
*35H26*	26	H	3.310"	3.111"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	0.8
*35H28*	28	H	3.550"	3.349"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	0.9
*35H30*	30	H	3.790"	3.588"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	0.9
*35H32*	32	H	4.030"	3.826"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	0.9
*35H35*	35	H	4.390"	4.183"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	1.0
*35H36*	36	H	4.510"	4.303"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	1.0
*35H40*	40	H	4.990"	4.780"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	1.2
*35H42*	42	H	5.230"	5.018"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	1.2
*35H45*	45	H	5.590"	5.376"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	1.4
*35H48*	48	H	5.950"	5.734"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	1.5
*35H54*	54	H	6.660"	6.449"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	1.8
*35H60*	60	H	7.380"	7.165"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	2.3
*35H70*	70	H	8.580"	8.358"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	2.8
*35H72*	72	H	8.810"	8.597"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	3.0
*35H80*	80	H	9.770"	9.552"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	3.8
*35H84*	84	H	10.250"	10.029"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	4.0
*35H96*	96	H	11.680"	11.461"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	5.3
*35H112*	112	H	13.590"	13.371"	1-1/2"	1-1/4"	1/16"	2-1/2"	1-5/32"	0.168"	6.8

35 Idler Sprockets

Ball Bearing	Needle Bearing	Bronze Bushed
Ball Bearing	Needle Bearing	Bronze Bushed
*35BB18H X 1/2"*	*35NB13H X 1/2"*	35BR15 X 1/2"
35BB18H X 5/8"	*35NB13H X 1"*	*35BR21 X 7/8"*
*35BB19H X 1/2"*	--	*31E20 X 1/2"*
*35BB19H X 3/8"*	--	--
*35BB20H X 5/8"*	--	--

USA Roller Chain

Features

- Chain Size: #35 Roller Chain
- Tensile Strength: 2,100LBS
- Economy Plus Quality
- Shot Peened
- Heat Treated
- Supplied in a 10ft Box Including a Connecting Link

Accessories

#35 Offset Link

Economy #35 Single Strand Roller Chain Connecting (Master) Link

Made In USA 35 Chain Breaker | 35 Roller Chain Breaker

Our Price: $2.99

Our Price: $1.99

Our Price: $99.99

Share your knowledge of this product. Be the first to write a review »